Philip_Roxxy
Well-Known Member
-Phille 's NX 2Fast Dragster Roxx updated 25-Feb-Project -
Hello, My name is Philip and is 15 years. I am from Sweden and have been going on with mopeds since I was 11 years. For about 8 months ago, I began a project which is now half, but I thought 'Start from scratch "here , To show you what I have done Hittil
Lets Go
Uppdate 20 Feb
Hello.
Now iam ready for uppdate my friends
After more work!
But no done.
Now I have ported clear the block, Became nice!
Thanks for today,Bye
Uppdate 21 Feb
Hello everyone! Since the project is almost ready but you have not followed it since I not been a member here before, How do I upload the project from the beginning as I said tidigare.Men as all this somsagt is clear so it is not a long time between each update.Cover is anyway ready PUTTY and varnished, because it has cast off, And when to cast of you must have a bright and beautiful because so yes.
Pics
Piece of cake. A Swedish proverb
Attachments of nitrous oxide tank mm welded,Right new in welding, but I was happy with it
be welded
Was all for today, Comment a lot now!
Uppdate 25 Feb
Hello everyone! Now casing, frame and engine block is painted, very special färg.Lite gold color.
Even rims have received little shine, And with fresh rubber!
I polished the engine bolt rod
All for today, will update on the weekend I think, Comment on now!
Uppdate 28 Feb
Hey everyone! Throwing up a picture of the motives varnished cover.
A saddle with a sponsor grejj from www.sybo.se, Fits with those orange tribles on the cover
Was all for today, hope you like what you saw and comment a lot now!
Hello, My name is Philip and is 15 years. I am from Sweden and have been going on with mopeds since I was 11 years. For about 8 months ago, I began a project which is now half, but I thought 'Start from scratch "here , To show you what I have done Hittil
Lets Go
Sponsored by:
www.sybo.se
www.sybo.se
Owner: Philip
Appearance: Philip
Engine: Philip
Polishing: Philip,
Lack: Swepool atoucar & Daniel Fahlström
Appearance: Philip
Engine: Philip
Polishing: Philip,
Lack: Swepool atoucar & Daniel Fahlström
Finish At least 23 hp on the rear brake may go to Germany in 2009 Event speaking exhibit at tvåhjulsmässan 2009 Get ready for summer 2009 Åka at many hits Have fun in the meantime
Setup No. 1.
NX wet System
engine-Landscape minarelli lc dd
2Fast 80cc crank-gear-
2Fast
Exhaust-Homemade
Variator, Malossi MHR Over 05 Set-
Ignition Malossi MHR E-prom
Carburettor-PWK Kehin 30mm Intake-
Home made Pulley-Stage6 CNC
Drev-? Stock-C4 Polymer
NX wet System
engine-Landscape minarelli lc dd
2Fast 80cc crank-gear-
2Fast
Exhaust-Homemade
Variator, Malossi MHR Over 05 Set-
Ignition Malossi MHR E-prom
Carburettor-PWK Kehin 30mm Intake-
Home made Pulley-Stage6 CNC
Drev-? Stock-C4 Polymer
record 150m 2Fast 80cc:
reaction:
Top speed of Sprint:
Time: 201m 2Fast 80cc Rektionstid:
Top speed of Sprint:
Time:
reaction:
Top speed of Sprint:
Time: 201m 2Fast 80cc Rektionstid:
Top speed of Sprint:
Time:
Polishing
Wheels Gaff Whelieebar Bromsok Brake Pumps Steering Kitt Chrome Exhaust Variator-Cover Water Pumps-Cover Lack cover engine
Security
Dödmansgrepp
Homemade tank under the cover
Whelebar
Fully welded on the frame
Michellin Pilot sport tires
Dual brake discs produced
Appearance Really dragster style
Extreme varnish
Long & Very low chromium
Custom saddle
Aerox rims
Aerox framework (Wholly ombygd) MKT MKT SLUSH
Homemade tank under the cover
Whelebar
Fully welded on the frame
Michellin Pilot sport tires
Dual brake discs produced
Appearance Really dragster style
Extreme varnish
Long & Very low chromium
Custom saddle
Aerox rims
Aerox framework (Wholly ombygd) MKT MKT SLUSH
We start with a little ramdelar from a aerox frame
This is how I want it
caps from Honda 1000RR to become a full cap8P
Even a penny from Harley Davidson Super Glide
Where we stop for this time, Hello!
Uppdate 20 Feb
Hello.
Now iam ready for uppdate my friends
After more work!
But no done.
Now I have ported clear the block, Became nice!
Thanks for today,Bye
Uppdate 21 Feb
Hello everyone! Since the project is almost ready but you have not followed it since I not been a member here before, How do I upload the project from the beginning as I said tidigare.Men as all this somsagt is clear so it is not a long time between each update.Cover is anyway ready PUTTY and varnished, because it has cast off, And when to cast of you must have a bright and beautiful because so yes.
Pics
Piece of cake. A Swedish proverb
Attachments of nitrous oxide tank mm welded,Right new in welding, but I was happy with it
be welded
Was all for today, Comment a lot now!
Uppdate 25 Feb
Hello everyone! Now casing, frame and engine block is painted, very special färg.Lite gold color.
Even rims have received little shine, And with fresh rubber!
I polished the engine bolt rod
All for today, will update on the weekend I think, Comment on now!
Uppdate 28 Feb
Hey everyone! Throwing up a picture of the motives varnished cover.
A saddle with a sponsor grejj from www.sybo.se, Fits with those orange tribles on the cover
Was all for today, hope you like what you saw and comment a lot now!
Last edited:
Good luck!
