pinjas said:nice rally too, impressive the front fork do you sell it??? My next idea was to put a handelbar like you, like a motocross bik. where do you find it????Or you tune the original????
the front paioli fork are an aftermarket piece, it doesnt come originaly on any scooter. you has to buy it from paioli direct.
pinjas said:the fork is made for aprilia SR but i turn the fork for 180° to fit the rally, and for this reason it could seen push backward, because the SR has itpush in front.
the radiator originaly it is one, but i add one piagio radiator by myself for better cooling, and it work out fantastic.I have in mind to put another on on the front under the lights.
here it is the picture od the disc:
you know that runner disc has 5 holes and the aprilia rim only 3. so i use one original hole on the disc and made 2 new one to fit the aprilia rim, it is a taught and very precisly job, 20 minutes to do it.
MinaRallyLC said:What do you mean with:
the fork is made for aprilia SR but i turn the fork for 180°
Did you turn around? Or did you bent it? Because you fork isn`t right, looks like you`ve bent it.
Is the quality better from this fork then the original stock one?
pinjas said:... i turned it for 180° like you turn the handelbar left or right. take a look on a stock SR fork and then on my. on a SR are like they must be, on my rally are turned aroun for 180°.
pinjas said:to change the spring rate or oil on stock rally fork it is inpossoible, like th epiagio fork this fork work on springs and grass, not oil. ....
pinjas said:hi, so i have this idea to put the carburator back like piagio scooter. i say a lot of you did this, do you have any photo or advice to rell me for a better result.
carburators possibles to use
malossi PHBG 19 BS TEAM
Keihin 28mm
dellorto PHBL 25 BS
for racing 19 team possible only, but for road show 28 admited)
i intend to build a piece in aluminium and then put on a piagio racing malossi runner colector, because it is shorter than the malossi racing runner colctor for minarelli.
pinjas said:So i take 20 minutes for you and draw it down. Look at the picture and than you will understand. The SR fork isnt straight from top to the bottom, but the fork has smo degrees angle in the midle, so i turn it 180° around and for this reason the fork looks like it has been demaged, but it wasnt, it is only dor thet angle in the fork. A better explenation of this i can`t do it.
for the fork see www.paioli.______
Here it is my frends SR RACING
pinjas said:it is inpossible, you have to built a new piece to get 0°