Tiba, this is offcourse not true.tiba_karotsu said:Ss for using less washers for more top speed i think that's not true, think for a while even if it had no washers the belt will only travel to the maximum point where the vario is capable of (as the engineers made it) so if the scooter lacks top speed it's either the vario design is to blame or you just haven't got enough gear or RPM to pull you at the big end.
True, offcoursetiba_karotsu said:the rear pulley also limits the amount of travel the belt does at the vario, even if the belt starts higher at the front vario then the belt also descends down a bit at the rear pulley & when the belt hits rock bottom at the rear pulley you end up with the belt maxing out at the same position as it did with the correct washers installed, unless you put too much washer then that will affect top speed performance.