trueOverrev
Well-Known Member
HI GUYS,
I'am planning to build another project and hopefully this will be my last scooter. Basically I need a scooter that has INSTANT power with less modification on the engine. It needs to be realible, everyday use, can withstand long rides and the punishing warm temperature in the Philippines.
I have experienced engines from 50cc, 70cc , and 78cc. All of them has the power output that i was expecting however the realibility issue and the cost of maintenance is taking its toll.
I think Gilera Runner 180cc is the way to go since it has 21HP Instant Power on its stock engine. Here is my plan, please advise and guide me on my wishlist and expectations.
Stock Cylinder Kit - just some polishing on the port transfers
Stock Crankshaft
Malossi MHR Pipe
25mm Dellorto Carb - as long as it will fit the stock airbox
Malossi VL13 Reedvalve
Malossi Variator
Malossi Delta Clutch
Malossi Torque Drive
Malossi Torsion Controller
Malossi Gearing
Malossi Digitronic CDI
HP Expectation - 30HP
TUNER: tiba karotsu
I'am also contemplating on 55mm BGM EVO Stroker Crankshaft - however I want to try running it on Stock Crankshaft and see if the torque that i want is there.
PLease feel free to edit my engine wishtlist to hit my GOAL interms of the HP.
SUSPENSION and BRAKING:
Here is the most expensive part.
Front: Malossi F36 vs F32S ---dont know what to choose
Rear: Malossi RS24/10
Front Disc : Malossi Whoop Disc 250mm
Rear : ???? I dont know my options
Caliper: Stage6 4 Piston Caliper
Lever: Brembo Radial Master Cylinder 16X18 - just for the front
I want to have the BEST SUSPENSION and RIDING COMFORT for LONG RIDES. Not too mention in only 5"4 in height and weights 110lbs. It needs to be fully adjustable to fit my riding pleasure. I dont know the difference between the F36 vs F32S other than the Price and diameter. F36 has 36mm and F32 has 33mm if im not mistaken. Most of the runners on the net has F32S forks. I wonder why. Since these parts are so EXPENSIVE, what are my chances in getting used parts that are in good condition?
I do appreciate all the inputs that you guys will share.
Have a wonderful day.
I'am planning to build another project and hopefully this will be my last scooter. Basically I need a scooter that has INSTANT power with less modification on the engine. It needs to be realible, everyday use, can withstand long rides and the punishing warm temperature in the Philippines.
I have experienced engines from 50cc, 70cc , and 78cc. All of them has the power output that i was expecting however the realibility issue and the cost of maintenance is taking its toll.
I think Gilera Runner 180cc is the way to go since it has 21HP Instant Power on its stock engine. Here is my plan, please advise and guide me on my wishlist and expectations.
Stock Cylinder Kit - just some polishing on the port transfers
Stock Crankshaft
Malossi MHR Pipe
25mm Dellorto Carb - as long as it will fit the stock airbox
Malossi VL13 Reedvalve
Malossi Variator
Malossi Delta Clutch
Malossi Torque Drive
Malossi Torsion Controller
Malossi Gearing
Malossi Digitronic CDI
HP Expectation - 30HP
TUNER: tiba karotsu
I'am also contemplating on 55mm BGM EVO Stroker Crankshaft - however I want to try running it on Stock Crankshaft and see if the torque that i want is there.
PLease feel free to edit my engine wishtlist to hit my GOAL interms of the HP.
SUSPENSION and BRAKING:
Here is the most expensive part.
Front: Malossi F36 vs F32S ---dont know what to choose
Rear: Malossi RS24/10
Front Disc : Malossi Whoop Disc 250mm
Rear : ???? I dont know my options
Caliper: Stage6 4 Piston Caliper
Lever: Brembo Radial Master Cylinder 16X18 - just for the front
I want to have the BEST SUSPENSION and RIDING COMFORT for LONG RIDES. Not too mention in only 5"4 in height and weights 110lbs. It needs to be fully adjustable to fit my riding pleasure. I dont know the difference between the F36 vs F32S other than the Price and diameter. F36 has 36mm and F32 has 33mm if im not mistaken. Most of the runners on the net has F32S forks. I wonder why. Since these parts are so EXPENSIVE, what are my chances in getting used parts that are in good condition?
I do appreciate all the inputs that you guys will share.
Have a wonderful day.