Yamaha Aerox project NL

Hi this is my Yamaha Aerox project.
I bought my aerox just to replacemy bike, and i didnt want some kind of lame bike so i searched a bit and found this aerox. I fell for it directly, the engine etc. was completely standard. So to make a begin with scooters it was good enough, ectually it was quite perfect to me But i still didnt had my drivers license so i just drived without. After 2 months the scooter sudenly didnt drive that good anymore, but i needed to get to school tough so i just drove on it, it still worked.
But 2 weaks later a nightmare strook down My aerox wich i tought was so wonderfull didnt drive anymore... It started but that was it it also fell off almost directly. So i started to took it apart. I started with taking the cover of. After that i separated the engine of the frame. I took my cilinder off and saw wich caused all problems... Its was full of scratches and the springs in my cilinder where broken, and this was just the beginning. I started taking my whole engine apart, when i had everything out of my engine i saw my Crank was totaly jammed :S so i neededto buy a new Crank and a new cilinder. A friend of mine had a DR 50cc cilinder and told me it was a good cilinder so i also bought it. The Crank i bought was a RITO pen 10 Crank. I maunted the Crank and the cilinder. i started with spraying my whole bike blue + white. I also bought a white BCD monoseat + a Malossi powerfilter (this one wasnt what i look for cause it was open... so i bought a new one : HEBO powerfilter with a cover for keeping water etc. outside) + i bought a new exhaust : Laser x Pro chrome (carbon cilencer) + rear shok absorber + stage6 blue riser kit + new Backlight.
I maunted this all and than i looked like this (not the most beautifull bike there is but its just the beginning









The HEBO powerfilter (without cover on it , dont mention the oil everywhere cause my oilkabel came loose and oil went everywhere :S and its really filty cause it rained for a few days)




Setup :

- DR 50cc
- standard Vario
- standard clutch
- standard clutch bell
- standard poullie's
- Laser x Pro
- 12 mm carburateur
- RITO Crank (pen 10)
- Stage 6 racing belt

Top = 90 / 95 km/ph


Well finaly i got my drivers licence and i was allowed to drive legaly ^^
Well the first day i got my first ticket
I droveto fast but they couldnt prove it so they gave me a ticket for a slick front tire :S (€60 and i need to buy a new tire : €55)
So i replaced the tire. 2 weaks later i went to school, when i drove home after school i had an accident i drove into the back of a car.
Luckely the damage onmy scooter was just a really really tiny scratch and that was it.
Well than everything went fine for 2 months.
Didnt have time to do anything onmy scooter so i just drove on it.
Well last weak i had a party at my home and a friend of mine ask meif he could drive on my scooter, and i sayed yes (he also had a scooter + drivers lisence).
So i gave him my keys and i went inside again. 10 minutes later an other friend of mine came to me and sayed my other friend fell
So i went outside and saw him standing there, i walked towords my bike but i couldnt seeall damge cause it wasto dark outside. I placed the bike inside and the party went on ^^
When i woke upp next morning my mom was up already and showed me the damage my bike had....
The whole right side was full of REALLLLLL BIG scratches, some things brokeand the exhaust had much damage
well 5 days after i went to a scooter center andllet them check how much the damage costs, they check everything and told me the damage was like €1000
So in like 4 weaks i get a new exhaust and new covers etc. etc. etc.
I will place some updates next weak, the damage pictures etc.
And in 3.5 weaks i get my next paymentof work
So than i go order the new parts
And update this project ofcource



This is how thebike lookedwhen i bought it...
1 Z-cover was broken.
The paint was all damaged so it didnt looked that well.
But i still liked it

Old setup :

- standard 50cc
- standard Vario
- standard clutch
- standard clutch bell
- standard poullie's
- Gianelli exhaust (black cilencer)
- 12 mm carburateur
- standard Crank
- standard belt

Top = Like 70 km/ph





More coming up

Here is the list of parts im going to order for my race setup next year


Setup then will be :

-Stage6 Pro 70cc
-Stage6 21mm carburateur
-Stage6 V-Force 3
-Stage6 inlet system
-Stage6 Clutch 107mm
-Stage6 Racing variateur
-Stage6 Half poulie
-Polini EVO speeddrive rear poulie
-Stage6 Inner rotor
-Stage6 Pro replica exhaust

also there will come :

-Stage6 Action throttle kit
-Stage6 Wingbell
-Stage6 Paddock stand
-Stage6 Subframe


and this year i get these parts, and some asseciores, such as kickstart + waterpump cover etc.


Screwset


Handelbars




BCD Extreme underseat


BCD Coverkit


stage6 pro replica exhaust


I cant wait to order these parts, and mount them on my aerox
And make pictures of every step, and post them here to show y'all ^^

we cant wait

i will get other parts ^^
not stage6 pro exhaust but i wil go and buy yasuni c16/c20/c21 (dont know yet wich one ^^)
and im going to buy this also in 2 weeks

-HEBO clutch / Polini 3G clutch
-HEBO vario

and maybee i also get a 19mm/21mm dellorto carburateur in 2 weeks
dus thats not sure yet ^^

The damage pictures come later on today (this are just a few things, not all damage cause there are just to many spots to take a picture of) ! :

c21 , its exspensive, but its worth the money

good luck with it.. i will keep following this project

IS GOING TO BE A NICE PROJECT BIKE I HOPE YOU MAKE LOOK NICE

yea me to
a few days to go and then i can order my parts
the first load atleast
thanks for the comments