Killerteam Racing - Fiberglass Sr

[Petrik.]

Haven't you seen my post?
asd

Haha what a bunch of rubish, show this man a little respect for making a own spacer and modding the cases for this speed cilinder for hes first time.

People always think they know best around here...

 

[.nitro.]

But have you seen them?
They are original!You cannot expect that they go fast because the cilinder is limited.

I am not the last one arrived, I have made a lot of Carters,so i can judge them

 

[apriliafan]

If you read properly, The actual pics are NOT of the finished engine article, I personally KNOW it is not finished like that, These were pictures of the progress, not of the finished article

 

[Petrik.]

But have you seen them?
They are original!You cannot expect that they go fast because the cilinder is limited.

I am not the last one arrived, I have made a lot of Carters,so i can judge them

since when ar minarelli transfers shaped like that, stock transfers are squared. dont be such a pain in the ass. you cant say it performs bad judging on pics.

 

[.nitro.]

If you read properly, The actual pics are NOT of the finished engine article, I personally KNOW it is not finished like that, These were pictures of the progress, not of the finished article

Isn't it finished?the carters are closed!

you cant say it performs bad judging on pics.

Don't say these nonsenses,photos say everything.

 

[Mr.Aerox]

dont make such a fuss from this.. the carters are fine, you cant judge the performance from the pics..

 

[.nitro.]

dont make such a fuss from this.. the carters are fine, you cant judge the performance from the pics..

Please shut up if you don't know how the carters must be optimized

 

[butch-182]

Please shut up if you don't know how the carters must be optimized

Please......

 

[SaTaNaSsO]

fucking hard project...

how will you adapt the front caliper (damn huge) to the original fork?

 

[Realtjuh]

Damn this thing is so nice

I'm looking forward to see this monster with a finished bodywork!

Keep up the good work :W

 

[xzburnoutzx]

Real sick! Have you had the change to test those brakes yet

 

[butch-182]

Realtjuh: Thanks man :king:
Burnout, hav'nt been able to test them yet, but soon after this weekend ill be making my first run.

Big update this weekend =)

Couple more pics of finished engine .... =P

 

[xzburnoutzx]

Nice, Did you have to mod and is that a MHR manifold?

 

[entrialgo]

can you put a photo or an scheme of the refrigeration sistem with the two radiadors please? thx

 

[san2]

howr u gonna control the bike from not underheating¿?

 

[entrialgo]

yes but i'm a litle nerd... but dont worry i think i've got the magic

 

[san2]

i didnt say overheating, i said "UNDER"heating, if the cylinder does not reach a certain optimum temperature the rings are not flexible enough to work properly at high revs and could snap, so with one radiator it might be too hot and with two it might be hard to get it to be hot enough as you do not have a thermostat...

 

[Petrik.]

then you tape them off untill it reaches the desired tepmerature, easy as 1,2,3.

 

[san2]

so ur gonna keep on taping and untaping all the time, have to dismount quite some pieces to get to where he has his radiator... wat u need is a thermostat man. shame the stage 6 is never in stock.

 

[Petrik.]

when your setting up your variator, you do the same thing...same principle