so it sparks over 10 mm?! should be ok then?Is it possible to measure it?
Spark is also present at a greater distance of 10mm or more
I have measured the 12 volt side and that was OK.
I got unreliable values on the sparkplug side
how did you find that enriched valve was stuck and did you figure stuck open or closed? and to be sure, you mean the electric heated valve that gives starting mixture?Hi!
Problem is solved.
- Valve clearance on the outlet valve adjusted from 0,05 to 0,09 mm
( instake is 0,01. Outlet has been 0,05mm the last 1000km whithout any issue)
- It looks like the enriched valve maybe was stuck. It now moves as it should
It will be interesting to see if this really was the cause.