Puerto RiCo Drag Scooters! VID for Lil' Mina Baby!!!

[SCOOTER GURU PR]

here i present ya' the Videos that i was telling you about...
they are kinda' old videos but the scooters
are even better now...:winner:

here's the red Scooter called La TIMIDA (The Shy one)
its a 4stroke VENTO Stock chassis...GY6 engine
but it is a BIG BLOck Stage 5 engine...
so'...enjoy...+ralf+
hehehehhe can any 2 stroke beat it...cuz this one of the fastest
scooter and 4stroke engine in the world...:henko:


and here i present proudly my best weapon...9||6
the nigthmare of any two stroke and 4 stroke...:W
its a 2 stroke engine and the fastest here in the world...
so' i give you this one La Zorra (The Ho')+pippi+
can any scooter from there beat thiz one from here?x|


amd here its another two stroke from my team of scooters...:+
this one has a NOS system but we were not using it...this time..
and this is the run with out the NOS in it...:~
do you have something like this???8P


this is an example of scooter racing here at Puerto Rico...:W
we run 1/8mile (660ft)

 

[DennisG]

that looks nice, they seem to run pretty good.
nice job

 

[Tommy.]

the speed on the signs is in mph or kmh?

would love to see these monsters in real life!!!

 

[SCOOTER GURU PR]

the speed on the signs is in mph or kmh?

would love to see these monsters in real life!!!

as fun you can imagine it....the speeds are taken on MPH8P
so they are reeeeaaaaaaaally damn fast!!!-:-

 

[Tommy]

How much CC are the engines? We did last summer with 78cc dragster 1/8 mile in 7,2 seconds.

 

[SCOOTER GURU PR]

How much CC are the engines? We did last summer with 78cc dragster 1/8 mile in 7,2 seconds.

the first one is a 4stroke engine single cylinder
bigblock custom GY6 engine
stroker crank that has 290cc or close to it...
:W
the second one is my 2stroke engine
650cc stock engine...single carb...
that runs 6.67 we are looking to make it run
6.3 o even 5.sec but it is too much power for
the jockey to handle....it runs 97.MPH

the third one is a 325cc 2stroke engine
stock engine that runs 7.1 on its best run...-:-

remember that our chassis are heavyly reinforced-:-
....do you in there run 1/8mile (660Ft)....:#

hehehehehehe i have a 4stroke engine that's
the fastest Gy6(VENTO) engine in the world
that runs 7.19 @ 90.90MPH
we are looking to make it the first Gy6 engine to
touch the 6.sec zone....maybe this week on tuesday
or thursday we will make the run on the strip...
so' ill give ya the updates thiz week!!!

PEACE!

 

[Jordi.]

when Tommy drives a 7.2 with 78 cc than the times your driving not so fast at all....

 

[[Nelis]]

Nice that you can drive this fast, but when you compare The cc's we in the netherlands sprint with and you in puerto rico then you arent so fast as you think :!.

 

[SCOOTER GURU PR]

Nice that you can drive this fast, but when you compare The cc's we in the netherlands sprint with and you in puerto rico then you arent so fast as you think :!.

remember that our engines are bigger and are 4stroke
so' im only telling ya this...when have you seen a 4stroke
engine specially a VENTO ENGINE (GY6) run this fast?
and our chassis are heavier too....so if you mount your motor
that runs 7.2 and its a 78cc in my chassis and run that time
ill tell you dats one hell of a motor...
so imagine if i mount my motor on your bike's chassis...
it would run even faster...jejejejejejejje...

im just saying thus..i have 2strokes here but there are only 2
wich are mine...and look at them that they are very heavy
compared to your chassis... but all other engines here at PR
are 4strokes....and jejejejje to make an Gy6 run at your side
it takes a looooot of work...remember they are pure torque
not agility...i have a 175cc alcohol engine that runs 7.33 @ 90.23MPH
all motor non nitrous...and we are tuning it to make it the fastest
alcohol GY6 all-motor to run 7.2 so' i can put it to the test that our
4strokes has the ability to keep up...
and remember that tuning your engines and making them run is a very
different way of how to make an GY6 4stroke run like your 2strokes...
im already making info on drag races on your side
so' maybe ill be taking my fastest's 4strokes and putting them to the test
against the fastest 2strokes....and ill be taking my 2strokes too
to run them too....
i am already looking foward to go to a drag race in there sooon...

PEACE!

 

[Alphamaennchen]

the gy6 engine is totaly sick mannnnnnnnnnn !!!!

 

[Bas]

Nice video's, fast GY6 scooters. The comparison between our 2-strokes (wich are mainly 80cc or less) against 200cc 4-strokes or more is like comparing apples with pears. Both fruit but still different

Respect for your performance. Looking forward to more video's and pictures of your scooters and engines.

 

[SCOOTER GURU PR]

{!i agree with you Bas...
its comparison is very diferent
:#like apples and pears...both fruits but diferent trees...
to make a 2 stroke run very fast is very
different8P than to make a 4stroke run as fast as it...
there are differences between engines specs and
HP...so' its development for hi-performance is quite different...-:-

ill soon be posting new vids and pics on up-comming proyects...:!

PEACE!:winner:

 

[Ruud H.]

Nice performance But you say that your chassis is very heavy. Isn't it a idea to build suge a light chassis? So your are even faster:W

 

[SCOOTER GURU PR]

Nice performance But you say that your chassis is very heavy. Isn't it a idea to build suge a light chassis? So your are even faster:W

i can make chassis that weigths 6 to 8 pounds
but the torque of the motor would make it very difficult to
be a stable run remember that i have huge HP of NOS
in some bikes but i try to maintain records using stock chassis
ligthweigth but still stock...
and i love VENTO CHassis because you can make more
of the motor i can make it have more torque...
than in a ligthweigth chassis...

 

[Foxy_Nitro]

okay they are fast

and as u say u have 4stroke engines and we have 2stroke

but it does not matter in my eyes

al what matters is to get to the finish the fastest how or what or with wat does not matter

as long as you're the fastest

but i still like you're bikes

 

[SCOOTER GURU PR]

okay they are fast

and as u say u have 4stroke engines and we have 2stroke

but it does not matter in my eyes

al what matters is to get to the finish the fastest how or what or with wat does not matter

as long as you're the fastest

but i still like you're bikes

i have a cuestion about the kind of distance that you run on the
drag strips in there...not sprint racing....

here in PR we run 1/8 of a mile that's equal to 660 feet...
do you run same distance...ive' heard you run in there
half of the distance than our distance...
like 345 feet or so because our half distance is for 330 feet
that's what i have been told...and we run the first 60 feet
in 1.48 to 1.56 seconds and thats one hell of a start...
and we hit up to 90MPH in 7.19 seconds thats the record
for my fastest GY6 engine...