BOOST YA SCOOT
Well-Known Member
Hi my name is sam, and i live in the UK me and my brother own a scooter shop that is called boost ya scoot(www.boostyascoot.co.uk)
we are going to bulid this aerox to look custom but to also work on the road:L
My engine set up is going to be:
Stage 6 clyinder
Stage 6 crank
Stage 6 teflon case bearings
Malossi over range
Malossi delta clutch
Malossi vl14
Malossi stright manifold
XSH wedge
21 mm dell'orto
Stage 6 air filter
My custom parts:
Custom rossi colour (Blue,Yellow)
Rear back panle (BCD,KIESLAR)
Front panel (BCD,STANDARD)
MKTK under tray
Custom speedo braket
Stage 6 disc
Kieler deep dish wheel
Custom coved seat
First i get the scooter
The arox is standard
Now we start work on it
I take the engine block out of the aerox.
As we wait for the engine parts to be deliverd we get on with the custom panling
BCD and kiesler fibre glassing
Rubbed down the fibre glass
Put the fibra glass where the panles need it
I fit the MKTK under tray to see how the part fits
My brother now does some custom custom work on the panling
belly pan with aerox and shapes cut out
frist coet of paint
We now get the BCD headlight and see how
the head light had been plastic welded and filled
We now finih the back panle
The filler rubbed right down (finshed)
We have now got the engine part in and we start to rebuld it the block rebult
as we are doing this we send the panle to the painter (MR B)
We get the helmet painted to look good when riding the aerox
The block fully bult and the panles are back from painter (MR B)
The block back in the frame and started to be rebult
Stage 6 oversize disc on the wheel
custom cut out with the paint on it
the back end on know just the front to do
different air filter and indcators on
Now i just need to get the front on
we are going to bulid this aerox to look custom but to also work on the road:L
My engine set up is going to be:
Stage 6 clyinder
Stage 6 crank
Stage 6 teflon case bearings
Malossi over range
Malossi delta clutch
Malossi vl14
Malossi stright manifold
XSH wedge
21 mm dell'orto
Stage 6 air filter
My custom parts:
Custom rossi colour (Blue,Yellow)
Rear back panle (BCD,KIESLAR)
Front panel (BCD,STANDARD)
MKTK under tray
Custom speedo braket
Stage 6 disc
Kieler deep dish wheel
Custom coved seat
First i get the scooter
The arox is standard
Now we start work on it
I take the engine block out of the aerox.
As we wait for the engine parts to be deliverd we get on with the custom panling
BCD and kiesler fibre glassing
Rubbed down the fibre glass
Put the fibra glass where the panles need it
I fit the MKTK under tray to see how the part fits
My brother now does some custom custom work on the panling
belly pan with aerox and shapes cut out
frist coet of paint
We now get the BCD headlight and see how
the head light had been plastic welded and filled
We now finih the back panle
The filler rubbed right down (finshed)
We have now got the engine part in and we start to rebuld it the block rebult
as we are doing this we send the panle to the painter (MR B)
We get the helmet painted to look good when riding the aerox
The block fully bult and the panles are back from painter (MR B)
The block back in the frame and started to be rebult
Stage 6 oversize disc on the wheel
custom cut out with the paint on it
the back end on know just the front to do
different air filter and indcators on
Now i just need to get the front on
Last edited: