70 cc kit for Sym Jet Euro

[chisp3]

Hello everybody
I want to know where I can find a 70cc kit for my Sym jet euro 2004 horizontal engine, pin 12. I try one from Kymco Top Boy but screw pattern are smaller. A guy told me from Honda Dio zx 1994 up but here is where I need your help.
Saludos

 

[melf #50]

do you have a foto of the old cilinder? is it with reedvalve ON the cilinder on on the crankcase?

 

[tiba_karotsu]

SYM Jet has reedvalves on the cilinder. forget 70cc asian models of SYM Jet have 100cc engines & with lots of tuning parts we can get 135cc with LC cilinder kit (57mm) & stroker crank (54mm).

 

[chisp3]

do you have a foto of the old cilinder? is it with reedvalve ON the cilinder on on the crankcase?

The reedvalve is in the crankcase

 

[melf #50]

o.k. , then a Kymco Dink cilinder should fit , as far as i remember

Kymco sniper has a reedvalve on the cilinder , kymco dink has the reedvalve on the crankcase , these 2 are horizontal , and kymco dj is vertical..

but I don't know if there are any cilinders for sym or dink..

 

[melf #50]

o.k. , then a Kymco Dink cilinder should fit , as far as i remember

Kymco sniper has a reedvalve on the cilinder , kymco dink has the reedvalve on the crankcase , these 2 are horizontal , and kymco dj is vertical..

but I don't know if there are any cilinders for sym or dink..


this is a sym cilinder (DD 50cc) , looks exactly like DJ

http://www.malossi.com/Catalogo/Cata_Main.asp?Marca=280&Modello=MO/SYDD50&Famiglia=0&CodArt=31 8473

 

[chisp3]

The kit from the Top boy is the same for Dink, Cobra, People 50

 

[melf #50]

are you 100% sure?

 

[chisp3]

are you 100% sure?

Yes,I verify in the site 50cc.nl