ok, so i have a 03 vento triton (50cc minarelli clone)
i installed:
70cc Stage6 RACE cylinder (Squish set at .68mm)
Stage6 pro replica exhaust (with restrictor removed)
21mm Keihin Carb (with 110main jet) /w stage6 foam filter.
Kelli variator with 4g weights
Polini kevlar belt
Stage6 clutch with winged bellhousing (oj clutch springs)
RED Hebo Contra spring.
Im running premix 36:1 on 91 Octane fuel.
Currently my scooter pulls very hard off the line up to 10,000 rpms, but after maybe 25 feet, it drops to 7000 rpms and with the throttle wide open it crawls.... and can't rev back up to 8000 rpms at all.
at first i thought it was just my contra spring, i thought it was too weak to pull the belt back to the lower gearing to pull me, but now im starting to think it might be a jetting issue ?
i installed:
70cc Stage6 RACE cylinder (Squish set at .68mm)
Stage6 pro replica exhaust (with restrictor removed)
21mm Keihin Carb (with 110main jet) /w stage6 foam filter.
Kelli variator with 4g weights
Polini kevlar belt
Stage6 clutch with winged bellhousing (oj clutch springs)
RED Hebo Contra spring.
Im running premix 36:1 on 91 Octane fuel.
Currently my scooter pulls very hard off the line up to 10,000 rpms, but after maybe 25 feet, it drops to 7000 rpms and with the throttle wide open it crawls.... and can't rev back up to 8000 rpms at all.
at first i thought it was just my contra spring, i thought it was too weak to pull the belt back to the lower gearing to pull me, but now im starting to think it might be a jetting issue ?
