Xaniz EVO2 Benelli

Xaniz · 20 November 2005

Hi there! I bought a new project from R08813 on this forum cause I started getting tired of my old aerox. I would like to know what you think about my project The cylinder is going to get some tuning by any company, which havnt I decided yet, but its laying on Twins right now

Build by:

Engine

Minarelli LC DD (TWINS Tuned)
Polini Evolution II 70cc (TWINS Tuned)
HPI 2004 Innerrotor
Yasuni C21/C30
Keihin PWK 28mm D-Slide (TWINS Tuned)
Malossi MHR Overrange 2005
Malossi MHR DeltaClutch (Ø107)
Malossi MHR R.H.Q Ø12mm
Malossi MHR Wingbell
Malossi MHR Needlebearing Ø12mm
Malossi MHR Shortneck
Malossi HTQ PrimaryGearing 13/44
NGK Racingcable
KBC Wig 28mm
Moto Tassanari vForce3
SKF C4 Teflon Bearings
Denso W31ES-ZU
VHM Hichcomp. top
TopPerformance Gearbox Cover
XSH Filter Ø50mm

Look

SR Rims
Nudebar Aluminium
Paintjobs
Modifie Aerox buddyback
Yamaha R1 monoseat
Rebuild subframe

Safety

Braking Brake Pads S32
Fournales chrom 325mm shocker
Jetski Killswitch
Malossi MHR Brake Pads S13
Michellin Pilot Sport
Stage6 RPM/temp teller
TJT Oversize disc
Reich Waterpump 15liter/min

Goals

MN Hall of Fame
Under 10 sec. @ 201m
20+ Horsepower @ dynojet

Pics:

31/10 -05

OKO 28mm D-Slide Std

Tuned by South-Tuning. Almost done.

2/11 -05

KBC wig #2, bought by my friend freddan

// Xaniz

Sibo · 20 November 2005

Imageschack dosn't work any more @ scooterforum.net

load your pic's @ www.imgspot.com

Browni · 20 November 2005

Xaniz said:
Hi there! I bought a new project from R08813 on this forum cause I started getting tired of my old aerox. I would like to know what you think about my project The cylinder is going to get some tuning by any company, which?
Build by:
Engine

Minarelli LC DD (S-T Tuned)
Polini Evolution2 70cc ¤12
Polini Evolution Innerrotor
Doppler Endurance 2003 ¤12
KBC WIG @ 28mm (#2)
Malossi MHR Delta Clutch (107)
Malossi MHR Needlebearing ¤12
Malossi MHR Overrange 2005
Malossi MHR Shortneck manifold
Malossi MHR Wingbell
NGK Racingcable
OKO 28mm D-slide (S-T Tuned)
SKF C4
Tassanari vForce3 reedblock
Tomaselli Short-stroke gas
Top Performance Nardo gearboxcover (Overrange fixed)
Top Performance Turbocooler
TwinAir filter
Yasuni Carrera21

SR Rims
Nudebar Aluminium
Paintjobs
Modifie Aerox buddyback
Yamaha R1 monoseat
Rebuild subframe

Braking Brake Pads S32
Fournales chrom 325mm shocker
Jetski Killswitch
Malossi MHR Brake Pads S13
Michellin Pilot Sport
Stage6 RPM/temp teller
TJT Oversize disc
Reich Waterpump 15liter/min

MN Hall of Fame
Under 10 sec. @ 201m
20+ Horsepower @ dynojet

// Xaniz

You should be under 10 sec with these setup!! Maybe 9,4-9,6 or so..

Xaniz · 21 November 2005

20/11 -05

Kinda dirty, gonna get a wash and then sandblasted and some tuning for evo2

NeoGeniX · 21 November 2005

Hehe is that blackphoenix his old benelli...sure looks like it

good luck with the project

Xaniz · 22 November 2005

NeoGeniX said:
Hehe is that blackphoenix his old benelli...sure looks like it

good luck with the project

hmm.. I dont think so, actually I have no idea

Taz! · 22 November 2005

Very nice! Hope u do something really speciell with this beauty

Goodluck!

//Taz!

Xaniz · 22 November 2005

Taz! said:
Very nice! Hope u do something really speciell with this beauty

Goodluck!

//Taz!

thank you Its going to be special

NeoGeniX · 22 November 2005

Xaniz said:
hmm.. I dont think so, actually I have no idea

Well what do you think? I think it is

Xaniz · 22 November 2005

NeoGeniX said:
Well what do you think? I think it is

http://www.tunescoot.de/gallerie/lelystad/bild27.600x450.jpg

haha, my friend got a picture of it to and I have some pics of it with that covers on the inside and I will get the blue covers, so I guess its his. Who is he?

Xaniz · 27 November 2005

update

My steeringbar, clamp etc. and Stage6 termometer!

MHR Wingbell

Subframe std.

Groupfoto of the stuff I have at home right now:

Xaniz · 29 November 2005

Freddan_ said:
Bitch, give me that clamp!

haha, forget it boy Btw, the benelli has been sended so its probably here @ Friday

Raekan · 29 November 2005

Looks nice Martin! =)

Good Luck with this new Benelli!

//Raekan

Xaniz · 2 December 2005

Raekan said:
Looks nice Martin! =)

Good Luck with this new Benelli!

//Raekan

thanks! Some new stuff has got up on the setuplist and I decided that Twins will be the tuner of the stuff

Minarelli LC DD (TWINS Tuned)
Polini Evolution II 70cc (TWINS Tuned)
HPI 2004 Innerrotor
Yasuni C21/C30
Keihin PWK 28mm D-Slide (TWINS Tuned)
Malossi MHR Overrange 2005
Malossi MHR DeltaClutch (Ø107)
Malossi MHR R.H.Q Ø12mm
Malossi MHR Wingbell
Malossi MHR Needlebearing Ø12mm
Malossi MHR Shortneck
Malossi HTQ PrimaryGearing 13/44
NGK Racingcable
KBC Wig 28mm
Moto Tassanari vForce3
SKF C4 Teflon Bearings
Denso W31ES-ZU
VHM Hichcomp. top
TopPerformance Gearbox Cover
XSH Filter Ø50mm

solo · 5 December 2005

Looking good Xaniz, i think this one gonna be a special thing =)

Godd luck with it.

.Tommy. · 5 December 2005

your scoot looks very good

Djilem · 6 December 2005

Yeah man, very nice project !

Xaniz · 6 December 2005

thanks for the comments! Some packages arrived today

6/12 -05

The Frame

All covers

Steeringbars..

HPI -04 Analog

XSH filter

Xaniz · 20 December 2005

Update 20 December

Xaniz · 7 January 2006

Update, I will soon start modifieing the back and my undercover

The R1 back

Xaniz EVO2 Benelli

South-Tuning Member!

For those 7 seconds

B.A.T tuning

South-Tuning Member!

Husqvarna SM450R

South-Tuning Member!

=)

South-Tuning Member!

Husqvarna SM450R

South-Tuning Member!

South-Tuning Member!

South-Tuning Member!

Sweden

South-Tuning Member!

RoadRunnered

Well-Known Member

pr0 rac3r

South-Tuning Member!

South-Tuning Member!

South-Tuning Member!

Similar threads