san2
Well-Known Member
i have an aerox with; motorforce 70 racing, motorforce HPC racing, malossi reeds, dellorto 21 + e13, cantillana R70 (hand made spanish pipe between a C16 and a C20) malossi multivar variator, a really wasted old belt (dont know brand) hebo clutch, 13/44 malossis... i have been trying to set it up to go well with this setup for ages but i cant figure out what is the problem, ive tried all roller weights, all clutch engaging postions, counter springs, jets, clip positions ertc etc... wel this is what the bike does=
1.when i am going mid speed, mid revs, the bike rattles (watch video) (sounds like a clip position problem, but have tried :S)
2. when i am going about 3/4 throttle the bike is revving nicely and cleanly and pulling alrite, then when i put it 100% throttle, the sound gets deeper and louder, the revs drop bout 500 rpm and the bike starts pulling much less (sounds like main jet problem but ive been going smaller and smaller and at this point dont wanna go down anymore, am quite low already (even though spark plug is pretty dark, but im going lower then i usually go with the same carb))
i will put the video l8er, youtube's being a jerk!
1.when i am going mid speed, mid revs, the bike rattles (watch video) (sounds like a clip position problem, but have tried :S)
2. when i am going about 3/4 throttle the bike is revving nicely and cleanly and pulling alrite, then when i put it 100% throttle, the sound gets deeper and louder, the revs drop bout 500 rpm and the bike starts pulling much less (sounds like main jet problem but ive been going smaller and smaller and at this point dont wanna go down anymore, am quite low already (even though spark plug is pretty dark, but im going lower then i usually go with the same carb))
i will put the video l8er, youtube's being a jerk!