Benj_Ark
A Frenchyyy :D
Hello All !
As some French guys, I go to present you my Stunt with which I intend to participate at SBO runs and French meetings in 2008.
Base : Stunt
Engine : Minarelli horizontal from Nitro
Engine Setup :
- Cylinder MK Pro Race 2 prépa by MC12 (French men)
- Exshaut MK Pro Race 2
- Crankshaft MHR RHQ 12mm en bielle de 85
- Carburator 28 KOSO
- reedvalves V-Force 3 Mina
- Pipe TVX
- Pack Overrange 05
- Stage 6 Torque Control
- Clucth MK Pro Race
- Gear Stage6 15*39
- Ignition MHR Hyper Racing
- B9EVX
- Water pomp Bosch from Renault 21 (French touch !)
Now the pics !
Cylinder stock :
The exhaust :
The crankshaft :
The clutch & the Torque Control :
The pack overrange :
The ignition :
Some pics at Hockenheim for the SW :
I want to thank photographer for this photograph, I have very bloody stupid air
Une fois les fourreaux rabaissés :
An order arrived between the SW and the RSS3 (French meeting) :
Repairing of furnaces :
Some little things :
The Stunt in my Peugeot 205 Gti in order to go at the RSS3, french meeting, 950km (600miles) from my home
Stunt at RSS3 :
The future paint, black from Renault Clio RS 3 :
Results from the SW :
52 - Benjamin Dele - 0,21 Sek. - 8,48 Sek. - 83,0 km/h
With an engine not regulated, i’m satisfied. The engine start for the 1st time in the SW camping.
At the RSS3, result from the “bench”
- 14.3ps with 4gr --> Too heavy ^^
- 17.1ps with 3.5gr --> Still too heavy ^^
In finale i’m in 3gr there.
Sorry for my bad English and the pics with pub, but i was in the Maxiscoot team during the shoot
If one of you has information in English on SBO 2008, which it contacts me please !
As some French guys, I go to present you my Stunt with which I intend to participate at SBO runs and French meetings in 2008.
Base : Stunt
Engine : Minarelli horizontal from Nitro
Engine Setup :
- Cylinder MK Pro Race 2 prépa by MC12 (French men)
- Exshaut MK Pro Race 2
- Crankshaft MHR RHQ 12mm en bielle de 85
- Carburator 28 KOSO
- reedvalves V-Force 3 Mina
- Pipe TVX
- Pack Overrange 05
- Stage 6 Torque Control
- Clucth MK Pro Race
- Gear Stage6 15*39
- Ignition MHR Hyper Racing
- B9EVX
- Water pomp Bosch from Renault 21 (French touch !)
Now the pics !
Cylinder stock :
The exhaust :
The crankshaft :
The clutch & the Torque Control :
The pack overrange :
The ignition :
Some pics at Hockenheim for the SW :
I want to thank photographer for this photograph, I have very bloody stupid air
Une fois les fourreaux rabaissés :
An order arrived between the SW and the RSS3 (French meeting) :
Repairing of furnaces :
Some little things :
The Stunt in my Peugeot 205 Gti in order to go at the RSS3, french meeting, 950km (600miles) from my home
Stunt at RSS3 :
The future paint, black from Renault Clio RS 3 :
Results from the SW :
52 - Benjamin Dele - 0,21 Sek. - 8,48 Sek. - 83,0 km/h
With an engine not regulated, i’m satisfied. The engine start for the 1st time in the SW camping.
At the RSS3, result from the “bench”
- 14.3ps with 4gr --> Too heavy ^^
- 17.1ps with 3.5gr --> Still too heavy ^^
In finale i’m in 3gr there.
Sorry for my bad English and the pics with pub, but i was in the Maxiscoot team during the shoot
If one of you has information in English on SBO 2008, which it contacts me please !
