JmJ-Tuning
Well-Known Member
Hello out there.
I just wanted to show my newest scooter project.
And here it is. Yamaha Jog r frame with some Aerox engine, frontfork and aerox wheels.
Engine Setup:
Malossi Team 7T JmJ Max tuned.
Malossi Crankshaft.
Malossi Transmission Cover
Malossi Transmission
Malossi Overrange
Stylepro Delta Clutch with Black MHR Springs
Stylepro CNC Drive for Variator
Stylepro K&N Airfilter
Stage6 Performance Carburator
Yasuni C30 Chromed
Eprom Ingnition
J.m.J Intake system
I think it was all about my engine.
Some safety things:
SSP 280mm Brake Front
RPM Brakecaliber Front
Doppler HSM Shockspring.
Some pictures:
My scooter is now Ready for DHS (it is a Sprint day in Denmark leaded by DSSC)
My fastest time until now: 150m @ 7.23Sek.
Highest Powertest : 21.xxHK Dynostar
I have deleted my scooter profile on the danish scootergallery site so my old pictures are gone
But my scooter have a lot of new parts so maybe it was a god idea.
I was going to the danish sprint day in Vandel. my time for 150m was 6.995sek. And 22.45HK. But later my engine was broken, my block was i 3 parts after my friend tried my scooter. Pictures come.
And for my own Scooter meeting weekend on Skærbæk gokart track. Was also fine, but a friend tried my scooter again, so he tried to drive on bagwheel so he crashed and he had to go on the hospital.
But after DHS there was alot af new parts for my scooter off cause did my friend pay for those parts there was broken.
After DHS:
Black C30
New Engine
Vario Belt
Crankshaft
Some pictures when i was build the new motor for my Jog R/RR
My Bodyparts from www.kgi.dk
Dyno Print from DHS
Picture from DHS when a friend tried my scooter. My Frontwork was fucked because i hit a Halmblock.
And some pictures of my scooter to my own scooter meeting in Skærbæk.
Newest Pictures
I just wanted to show my newest scooter project.
And here it is. Yamaha Jog r frame with some Aerox engine, frontfork and aerox wheels.
Engine Setup:
Malossi Team 7T JmJ Max tuned.
Malossi Crankshaft.
Malossi Transmission Cover
Malossi Transmission
Malossi Overrange
Stylepro Delta Clutch with Black MHR Springs
Stylepro CNC Drive for Variator
Stylepro K&N Airfilter
Stage6 Performance Carburator
Yasuni C30 Chromed
Eprom Ingnition
J.m.J Intake system
I think it was all about my engine.
Some safety things:
SSP 280mm Brake Front
RPM Brakecaliber Front
Doppler HSM Shockspring.
Some pictures:
My scooter is now Ready for DHS (it is a Sprint day in Denmark leaded by DSSC)
My fastest time until now: 150m @ 7.23Sek.
Highest Powertest : 21.xxHK Dynostar
I have deleted my scooter profile on the danish scootergallery site so my old pictures are gone
But my scooter have a lot of new parts so maybe it was a god idea.
I was going to the danish sprint day in Vandel. my time for 150m was 6.995sek. And 22.45HK. But later my engine was broken, my block was i 3 parts after my friend tried my scooter. Pictures come.
And for my own Scooter meeting weekend on Skærbæk gokart track. Was also fine, but a friend tried my scooter again, so he tried to drive on bagwheel so he crashed and he had to go on the hospital.
But after DHS there was alot af new parts for my scooter off cause did my friend pay for those parts there was broken.
After DHS:
Black C30
New Engine
Vario Belt
Crankshaft
Some pictures when i was build the new motor for my Jog R/RR
My Bodyparts from www.kgi.dk
Dyno Print from DHS
Picture from DHS when a friend tried my scooter. My Frontwork was fucked because i hit a Halmblock.
And some pictures of my scooter to my own scooter meeting in Skærbæk.
Newest Pictures
Last edited: