Honda SH50 (Scoopy)

[Mr. ShowOff]

I have a few questions about the honda scoopy.

1. How do I make it faster!!!!!

2. What parts should I use.

Thanks.

 

[Mr. ShowOff]

how can I make a honda scoopy faster, and parts should I use?

 

[rydah]

?

does your honda scoopy have a dio motor on it? if so is it the upright or that flat motor.

 

[Mr. ShowOff]

does your honda scoopy have a dio motor on it? if so is it the upright or that flat motor.

It has an upright motor.

 

[emo]

you try this link http://forum.scooterforum.net/forum/showthread.php?t=66370 i think you share the same engine (honda Dio clone)

 

[rydah]

if your bike has a dio motor on it you should try to get yourself a stroker kit. you can get a koso 52mm crank and a koso 55mm bore and make a 125cc out of that bike, undercover like. if done right you can have a 100mph bike. out here in hawaii there are plenny stroker bikes and they are really fast. oh yeah and the parts are less than half that of yamaha polini or malossi parts.

 

[Browni]

emo, rydah

Can you tell me something about these stroker kits, cause I couldn't find anything in the web. I only found this http://www.hiperformance-moped-parts.20m.com/stroked.html and the http://www.motorcyclephilippines.com forum, but I don't understand the language. What brands make these kits? Koso, FM, POP??? Or any others? Which is the biggest stroker kit, and where can I find info/pictures about it?

 

[emo]

stroker kits are hard to find in the web, coz most of those brands are made in taiwan & every 2 months there new brands that are coming up.. right now CMR (brand) & RUIMA (brand) is the latest kit here..

 

[Browni]

stroker kits are hard to find in the web, coz most of those brands are made in taiwan & every 2 months there new brands that are coming up.. right now CMR (brand) & RUIMA (brand) is the latest kit here..

And what about the older ones? They disappeared? What do you think which brand makes good kits? Koso? Or others?
emo do you have a website where your scooters are (pictures, datas..)

 

[emo]

yeah some old brands are not available anymore here.. sorry i dont have a site, but if you can see my avatar that is my old Honda Dio1 (on a drag race) but right now we're setting up new dragracer Honda Dio engine 86cc on a lighter chasis (honda pax club).. most of the kits installed are taiwan made CMR krukas, Ruima cyl., 28 DO phbl, Ueno Demon variator, malossi kevlar belt, etc..

 

[Browni]

yeah some old brands are not available anymore here.. sorry i dont have a site, but if you can see my avatar that is my old Honda Dio1 (on a drag race) but right now we're setting up new dragracer Honda Dio engine 86cc on a lighter chasis (honda pax club).. most of the kits installed are taiwan made CMR krukas, Ruima cyl., 28 DO phbl, Ueno Demon variator, malossi kevlar belt, etc..

emo

I see this bike is very cool, but this pic is so little as possible)

emo if you have many very cheap carb like, OKo, Koso, Keihin, why are you use an italian carb like Dell'Orto?

Hey man Ruima has a homepage and cmr has too

http://www.ruima.com.tw/
http://www.cmr.com.tw/

 

[Browni]

emo

Do you know this japan company?

http://www.rs-zero.co.jp

 

[rydah]

Browni out here in hawaii Koso is the best parts for the honda motor. from what i know right now, the biggest crank you put into a dio block is a 54mm and the best cylinder that i have seen for that motor is a 55mm. these are the biggest parts you can get without special ordering things. the carbs use are 30mm or bigger. when you run 125 to 130cc strokers they need to drink. my friend owns a moped shop out here and he is a polini and koso dealer for the islands. he gets all the latest stuff from koso. he even has stroker parts for yamaha jog/aerox style motors. these bikes are really fun to ride. the power is unreal.

 

[emo]

emo

I see this bike is very cool, but this pic is so little as possible)

emo if you have many very cheap carb like, OKo, Koso, Keihin, why are you use an italian carb like Dell'Orto?

Hey man Ruima has a homepage and cmr has too

http://www.ruima.com.tw/
http://www.cmr.com.tw/

i used D'O just to be different from the others, coz everyone here uses the said carbs. & it is 2nd hand & i got it only at cheap price

 

[Browni]

Browni out here in hawaii Koso is the best parts for the honda motor. from what i know right now, the biggest crank you put into a dio block is a 54mm and the best cylinder that i have seen for that motor is a 55mm. these are the biggest parts you can get without special ordering things. the carbs use are 30mm or bigger. when you run 125 to 130cc strokers they need to drink. my friend owns a moped shop out here and he is a polini and koso dealer for the islands. he gets all the latest stuff from koso. he even has stroker parts for yamaha jog/aerox style motors. these bikes are really fun to ride. the power is unreal.

rydah

Wow it's not bad! And I read in here: http://www.hiperformance-moped-parts.20m.com/cylinders.html there are water cooled cylinders too! Do you use these?

emo

Ok now it's clear

 

[emo]

try this link to see my scooter (left behind) & race in our town.. http://motorcyclephilippines.com/forums/showthread.php?t=6996

 

[rydah]

Browni thats my other friends shop. i have a watercooled stroker honda. its a 52mm crank and a 54mm watercooled POP cylinder. my fav honda is a big stroker too thats aircooled. i find that you dont need watercooling on a honda, it just adds more weight. right now my friend has the fastest street moped on island 95+ and its a aircooled bike. let me know if you want to get in touch with my friends shop, he has a some really nice watercooled yamaha stroker parts. yamaha strokers and really fast too, 90+ no problem.