EvoFox

Z

Zelu

EvoFox


Hi !

I'm 17 years old and I come from Poland :W

First I would show U my old project, which was Daelim S-five ( '04 ).

Setup :
* Cylinder - Polini ForRace 70 *tuned*
* Crank - BGM Evo
* Lagers - NTN C3
* Exhaust - Tecnigas CR
* Vario - Malossi Multivar
* Clutch - Malossi Fly
* Belt - MHR
* Carburator - Arreche 19
* Ass - Oryginal *tuned*
* Valve - MHR Membran
* AIR Filter - Polini Air-Box
* CDI - Malossi

Few photo of this :

[ir]http://w2.bikepics.com/pics/2007%5C01%5C24%5Cbikepics-780961-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C04%5C07%5Cbikepics-856742-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C04%5C07%5Cbikepics-856740-full.jpg[/ir]



When I bought Firefox ( '03 ), it has setup like that :

* Cylinder - MHR Team 6T 70cc *tuned*
* Carters - *tuned*
* Crank - MHR
* Lagers - SKF C4
* Exhaust - MHR Team
* Vario - MHR OverRange
* Torq - MHR OverRange
* Clutch - MHR Delta
* Belt - MHR OverRange
* Carburator - Dellorto 19
* Ass - MHR Manifolds
* Valve - MHR Reed Valve
* AIR Filter - Malossi E-13
* CDI - Top Performance

[ir]http://w2.bikepics.com/pics/2007%5C05%5C03%5Cbikepics-885617-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C06%5C17%5Cbikepics-934784-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C06%5C17%5Cbikepics-934794-full.jpg[/ir]

Team didn't hv any pressure so I must to change it.. I had problem with electric too. CDI wasn't good, after 2-3 mouths I bought S6 Racing, which crashed after 100 km.. Squish was like 0.6 but.. I don't know what happend there..

[ir]http://w2.bikepics.com/pics/2007%5C06%5C12%5Cbikepics-929154-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C07%5C17%5Cbikepics-965801-full.jpg[/ir]

I bought Airsal Racing 70cc and I ported this.I must buy Polini Evo Ignition with lights and S6 HPC crank too because my old ignition wasn't good ( Ducati Euro 2 ignition - shit :| ), crank was in the same condition.. I changed my exhaust too - for new C20.

[ir]http://w2.bikepics.com/pics/2007%5C09%5C10%5Cbikepics-1019788-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C09%5C10%5Cbikepics-1019794-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C09%5C14%5Cbikepics-1023243-full.jpg[/ir]
[ir]http://w2.bikepics.com/pics/2007%5C09%5C14%5Cbikepics-1023240-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2007%5C11%5C11%5Cbikepics-1084366-full.jpg[/ir]

Power never too much so I thought that maybey i can make evo..
I bought Polini Evolution2 70cc and light ported this, Doppler Endurance crank and new C4 Teflon.

[ir]http://w3.bikepics.com/pics/2007%5C11%5C20%5Cbikepics-1093287-full.jpg[/ir]

I had everything so I can fix my engine :love:


[ir]http://w3.bikepics.com/pics/2007%5C11%5C22%5Cbikepics-1094792-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2007%5C11%5C22%5Cbikepics-1094795-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2007%5C11%5C22%5Cbikepics-1094802-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2007%5C11%5C22%5Cbikepics-1094803-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2007%5C11%5C22%5Cbikepics-1094804-full.jpg[/ir]


Setup :


* Cylinder - Polini Evolution 2 70cc
* Carters - *tuned*
* Crank - Doppler Endurance
* Lagers - SKF C4
* Ignition : Polini Evolution
* Plug : NGK BR9EGV
* Exhaust - Yasuni C20
* Vario - MHR OverRange
* Torq - MHR OverRange
* Basket of Clutch - S6 R\T
* Clutch - MHR Delta
* Belt - MHR OverRange
* Gaźnik - Dellorto 19
* Ass - MHR Manifolds
* Valve - MHR Reed Valve
* Filter - Malossi E-13


Soon I will give U some movie of this project ! 9||6

Can someone edit my photo ? I want see photo when I open this topic but I don't know how to do this ;p
Please !
​
THX for Bjorn ;p

​
 
Last edited:
Advertisement - register to remove this

I checked my piston and cylinder before about 50 km - it looks nice after this;)


[ir]http://w3.bikepics.com/pics/2007%5C12%5C21%5Cbikepics-1123043-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2007%5C12%5C21%5Cbikepics-1123036-full.jpg[/ir]

Only one of springs in Delta was destroy :/

[ir]http://w3.bikepics.com/pics/2007%5C12%5C21%5Cbikepics-1123044-full.jpg[/ir]

I would buy bigger carburettor.. I think about BGM 24mm or Dellorto 26 .. What U think ? Can I expect more power ?
Has anybody portmap for tuned Evo II ?
​
 
This is only testrun.. I think I can get about 1-2 hp more.
Soon I will hv bigger carbu and I hv time now so I can finished my cylinder. :+
Maybey I get DPR or Romano but I must wait for this..
In the first I want buy car.. :+ This is the most important thing now .
​
 
Hi !

Small update :)

I bought new carbu - Dellorto 26

[ir]http://w3.bikepics.com/pics/2008%5C01%5C13%5Cbikepics-1146513-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2008%5C01%5C13%5Cbikepics-1146518-full.jpg[/ir]

Scooter looks like that now :p

[ir]http://w3.bikepics.com/pics/2008%5C01%5C13%5Cbikepics-1146523-full.jpg[/ir]

​
 
Zelu said:
Hi !​


Small update :)​

I bought new carbu - Dellorto 26​

[ir]http://w3.bikepics.com/pics/2008%5C01%5C13%5Cbikepics-1146513-full.jpg[/ir]
[ir]http://w3.bikepics.com/pics/2008%5C01%5C13%5Cbikepics-1146518-full.jpg[/ir]​

Scooter looks like that now :p​

[ir]http://w3.bikepics.com/pics/2008%5C01%5C13%5Cbikepics-1146523-full.jpg[/ir]​
Click to expand...


Great job so far but bought a new carb nice!
 
Hey, i have a polini evolution engine and i have hebo clutch and vario but i am looking to get better clutch and a vario would you happen to know wich is the best to get?
 
The malossi O/R tranny is the best to get. Get ALL malossi in your tranny. Also, get the Malossi winged bell and Delta clutch. Dont mess with Polini tranny parts. I had 3 polini 2g clutches fall apart!!! I also had the Polini kevlar belt and is shredded within 10 miles or so!
 
Hi !

I don't hv too much time for scooter.. Job at weekend and school.. ;(

Last weekend I had all sunday for F15 so I set new carb for test - S6 TM24 .
And U hv few photos of TM and Firefox :W
I will give U some movie - maybey in this week.

[ir]http://w3.bikepics.com/pics/2008%5C04%5C06%5Cbikepics-1243603-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C06%5Cbikepics-1243606-full.jpg[/ir]

[ir]http://w3.bikepics.com/pics/2008%5C04%5C06%5Cbikepics-1243610-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C06%5Cbikepics-1243600-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C06%5Cbikepics-1243596-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C06%5Cbikepics-1243612-full.jpg[/ir]


​
 
Hmm.. This is MHR intake. But it is break so I must do this 'kit' . I know it is too long, maybey I will buy something else.

I don't want E13 over the wheel, subframe etc...
Scooter must looks like 100% oryginal - Inconspicuous.

What do U think about water pump like SSP ? It will be much better than standart ?
​
 
New parts : Reich pump ( 18l\min. ) and MHR Selettra + Kill . :#

[ir]http://w3.bikepics.com/pics/2008%5C04%5C26%5Cbikepics-1266823-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C26%5Cbikepics-1266828-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C26%5Cbikepics-1266831-full.jpg[/ir]


[ir]http://w3.bikepics.com/pics/2008%5C04%5C26%5Cbikepics-1266842-full.jpg[/ir]


I need thermometer which take power from dry battery ( small one ), do U know where I can buy something like this ? ;>
​
 
Back
Top