I bet you can't make a 2stroke engine do a BOOM LIKE THIZ (BROKEN GY6 ENGINE)

[SCOOTER GURU PR]

i know that you may be like this...
asking WTF...:'(
but this is one engine that did not withstand
its own power....:~
check thiz pix.....

Here's one view of the Cylinder...the piston
was stuck in it and the crankshaft broke in 2
here you can see its tip...:?

here's another view so you can see
that literally the crank cut in half the cylinder...

here i present you the cylinder head...
the piston broke the exhaust valve and this is
what happened....x|

here is the piston wich after a while we made it
come out of the cylinder...you can apreciate
what a whallop it gave then it hitted the cylinder's head
it made a big hooole tru it....

here's a front view of the GY6 engine block...
literally the crankshaft slashed it like butter...
didnt' it....:winner:

uuuuffff!!! this is worst! the back view of the engine
block...it was slashed entirely making a circle around
the engine block....it sounded like...
Boooooom!!!!kablaaampuuumpiiiiinplaaaan...pssssssss!!!
and engine oil was spilled allover the road....
this explosion happened while giving a test run on the engine...hehehehehehehhe...and we builded it the same day
and in the nigth we have already killed it....
HOW sad.......
hahahahahahahha
this not always happens...
this happened under unknown circunstances...
we thinked that the engine had too much compression
since it was an alcohol fueled and it gave us 325
of compression...so' it just couldn't handle it....
since it was a small engine 175cc 300mm stroker...
oooh...and i forgot...this engine wasn't NOS powered...
imagine what kind of breakdowns can a nitrous engine make with 32HP of NOS mixed with alcohol and fuel
and a huuuge engine with some big engine displacement
like 285cc could make....a huge bigbang!
jajajajajajajajja already it has happened....
and its not a pretty sigth...:+
Next day....we made another engine...
it said...only binplaaaaaaantaaan!
and this is what happened...

the crankshaft did not handled the power...
and its bended and broke in two...8P
no cylinder,no piston,no cylinder head damages happened
beause it was doing a test run AGAIN...but not at top speed...or power....let's just say it was like that...:?
hehehehehehehe....:'(
this engine breakdowns happened like 4 years ago
when i was new to the racing sport...and when i was
a novice at this...but this things made me learn a lot
and from that is that i have the fastests' GY6 in the world
all motor and nitrous powered...:+
well that's it for now...
Bet you cant' make a 2stroke broke like that!
YEEESSSS ITS TOTAL CARNAGE!!!!:winner:

 

[de papkarre]

damn that sucks men.
how much € is the damage you think?

 

[TheFinEst]

i´m out of words......

 

[SCOOTER GURU PR]

8Peach time we builded an engine it costs between
the 500.00 and 700.00 with out taking the piston and the head to
a machine shop to get them workshoped!

we blew up like 6 engines in that time...
and one blow up was in the dragstip just by turning the engine
on and starting it it started and BOOOOOOOOOOOOOOOOOOOOOOM!!!
the cylinder broke in 2 halves pieces and the piston nearly desintegrated
and the crankshaft blew up in 2 pieces!
just because there was too much alcohol in the combustion chamber
and the compression that it made was too much for it to handle and when it finally started there was the KAAAAAAAABOOOOOOOOOOOM!!!!
like a shotgun fire in the sky in the middle of 12:00am8P

 

[SCOOTER GURU PR]

i´m out of words......

and :?:?:?
was our first impression when we had the first engine blow up!
:+:+:+:~:~:~ was the rest impressions when the others blew up!
but since then in 3 years we haven't blow up any engine
and maybe those experiences were needed for our future engine building
heheheehehehehehehhe!!!