Thunderking89
Qtech Racing
SETUP!
piaggio Nrg engineblock
italkit ignition
stage 6 primary gearing 15/38
Polini secondary gearing
HEBO MANSTON 2 :wub:
MHR 45o Reedvalve
Stage 6 crank. 16 000 rpm or moore
c4 crankbearings?
skf bearings in the whole engine
both torqdrives
polini kevlar belt
malossi multivar 2000
Ported block
the cyl will be d.g tuned soon also
2g evo clutch
metrakit clutchbell
before
--->
Ac block 01
MHR cylinder
Yasuni c16
RMS racing vev
c4 skf lager
MHR nålager (needle bearings)
Kehin pwk 21mm d-slide 115 Mainjet
stage 6 filter
stage 6 kort 34mm insug (short mainfold)
tryckfjäder Vit (White preshure spring)
3,1g vikter (rollers)
Malossi multivar 2000 ( :hmm: )
Polini kevlar belt
polini 2g clutch
Polini Evo kopplingsklocka (clutchbell?)
--->kommande
MHR overange kit
MHR raksukrna drev
MHR reedblock
MHR koplingsklocka
MHR Vevparti
MHR avgasrör
MHR tändning (kanske)
MHR rs24 dämpare
MHR dekaler
21mm dellorto black edition (vill ha mindre filteranslutning så jag kan ha evo filter)
Old Setup
--->
MHR cylinder
RMS super racing crankshaft
c4 Skf crankbearings
MHR needle bearings
stage 6 Kehin pwk 21mm Flastslide (115 mainjet)
stage 6 filter
stage 6 short 34mm mailfold
Yasuni c16
Preshure spring malossi white
3.2g rollers
Malossi multivar
Polini kevlar belt
Polini speed drive (torq)
Polini Evolution clutchbell
--->On it's way or will be done
MHR overange kit
MHR sprockets
MHR reedblock
MHR crankshaft
MHR exaust
MHR ignition
MHR rs24 bumper
Polini Evolution filter
Koso 28mm carb (or 30 )
Update 19/3 2005
now my body kit came home from the paintjob, also i got my big intake and my kehin 21mm carburator
here a whole view
i builded on The exaust but it didn't fit so well that i thought but efter a time laborationg with diffrent bolts i got it to fit,
my moped is at a friend now cause under the testrun the mainfold and my throttle wire broke.
i can tell u guys that it gave some power multivar and TJT exaust
going to film it soon^^...
Here is my old stage 6 piston
here we got a nice box
MHR! :wub:
Multivar
nearly finished :wub:
TjT
everything
building in progress
COMMENT!!
washed the crap of the moped and got some nice shots
Efter!
Under construction
EFTER!
MOVIE! http://bakkus.homeftp.net/~koop/filer/film/Stalker.wmv
New setup: .
piaggio Nrg engineblock
italkit ignition
stage 6 primary gearing 15/38
Polini secondary gearing
HEBO MANSTON 2
MHR 45o Reedvalve
Stage 6 crank. 16 000 rpm or moore
c4 crankbearings?
skf bearings in the whole engine
both torqdrives
polini kevlar belt
malossi multivar 2000
Ported block
the cyl will be d.g tuned soon also
2g evo clutch
metrakit clutchbell
MHR or kit.
On its way, Yasuni c30!
.. also some new pics for you guys .
and the building began
i sat 35h in a row with only the damn ignition
ok, don't whine it's will be fixxed just bought it.
now i can tell you that i can't putt full throttle cause then i crash
now i started the first layer on my bodywork
Enjoy
second Layer ..
piaggio Nrg engineblock
italkit ignition
stage 6 primary gearing 15/38
Polini secondary gearing
HEBO MANSTON 2 :wub:
MHR 45o Reedvalve
Stage 6 crank. 16 000 rpm or moore
c4 crankbearings?
skf bearings in the whole engine
both torqdrives
polini kevlar belt
malossi multivar 2000
Ported block
the cyl will be d.g tuned soon also
2g evo clutch
metrakit clutchbell
before
--->
Ac block 01
MHR cylinder
Yasuni c16
RMS racing vev
c4 skf lager
MHR nålager (needle bearings)
Kehin pwk 21mm d-slide 115 Mainjet
stage 6 filter
stage 6 kort 34mm insug (short mainfold)
tryckfjäder Vit (White preshure spring)
3,1g vikter (rollers)
Malossi multivar 2000 ( :hmm: )
Polini kevlar belt
polini 2g clutch
Polini Evo kopplingsklocka (clutchbell?)
--->kommande
MHR overange kit
MHR raksukrna drev
MHR reedblock
MHR koplingsklocka
MHR Vevparti
MHR avgasrör
MHR tändning (kanske)
MHR rs24 dämpare
MHR dekaler
21mm dellorto black edition (vill ha mindre filteranslutning så jag kan ha evo filter)
Old Setup
--->
MHR cylinder
RMS super racing crankshaft
c4 Skf crankbearings
MHR needle bearings
stage 6 Kehin pwk 21mm Flastslide (115 mainjet)
stage 6 filter
stage 6 short 34mm mailfold
Yasuni c16
Preshure spring malossi white
3.2g rollers
Malossi multivar
Polini kevlar belt
Polini speed drive (torq)
Polini Evolution clutchbell
--->On it's way or will be done
MHR overange kit
MHR sprockets
MHR reedblock
MHR crankshaft
MHR exaust
MHR ignition
MHR rs24 bumper
Polini Evolution filter
Koso 28mm carb (or 30 )
Update 19/3 2005
now my body kit came home from the paintjob, also i got my big intake and my kehin 21mm carburator
here a whole view
i builded on The exaust but it didn't fit so well that i thought but efter a time laborationg with diffrent bolts i got it to fit,
my moped is at a friend now cause under the testrun the mainfold and my throttle wire broke.
i can tell u guys that it gave some power multivar and TJT exaust
going to film it soon^^...
Here is my old stage 6 piston
here we got a nice box
MHR! :wub:
Multivar
nearly finished :wub:
TjT
everything
building in progress
COMMENT!!
washed the crap of the moped and got some nice shots
Efter!
Under construction
EFTER!
MOVIE! http://bakkus.homeftp.net/~koop/filer/film/Stalker.wmv
New setup: .
piaggio Nrg engineblock
italkit ignition
stage 6 primary gearing 15/38
Polini secondary gearing
HEBO MANSTON 2
MHR 45o Reedvalve
Stage 6 crank. 16 000 rpm or moore
c4 crankbearings?
skf bearings in the whole engine
both torqdrives
polini kevlar belt
malossi multivar 2000
Ported block
the cyl will be d.g tuned soon also
2g evo clutch
metrakit clutchbell
MHR or kit.
On its way, Yasuni c30!
.. also some new pics for you guys .
and the building began
i sat 35h in a row with only the damn ignition
ok, don't whine it's will be fixxed just bought it.
now i can tell you that i can't putt full throttle cause then i crash
now i started the first layer on my bodywork
Enjoy
second Layer ..