[STC] Yamaha Aerox MKPR2. Latvia

Ruu

Well-Known Member
Hi scootertuners. My name is Rudolf, and i come from Latvia, Jelgava. I`am 18 years old and i`am keen on as you see scooter tuning and proffesional bowling.
So 13.03.2008 i bought my second scooter- Yamaha Aerox R 2007.
Season 2008 i ride it with s6sport pro + c21 and 24mm, and at winter 2009 I set up my mkpr2 cyilinder and other high end stuff.


Present Setup:

-Metrakit Pro Race 2;
-Yasuni C21 Black Edition;
-Italkit Selettra Curva 2;
-Malossi MHR crankshaft
-MHR Overrange set;
-MHR Delta Clutch;
-MHR Wingbell;
-Stage6 Einlassystem;
-Keihin PWK powerjet 24mm;
-Stage6 Vforce3;
-Stage6 C4 bearings;
-Malaguti F12 cooler;
-SSP water pump;
-Koso GP Mini Tacho;
-Stage6 Subframe.

13.03.2008.

1216064089.JPG


1216064109.JPG


1216064129.JPG



15.03.2008.

-Yasuni C21 Black Edition

1216064158.JPG


1216064190.JPG
B)

28.03.2008.

- Stage6 Iepluudes sisteema ar vaarstu

1216064218.jpg



29.03.2008.

- Stage6 Sport pro
- Malossi MHR crankshaft

1216064238.jpg


1216064256.jpg


1216064315.jpg


1216064402.jpg


Under Construction...

1216064364.jpg


1216064428.jpg


Season 2008 was rided by stock crankshaft on S6sp.

10.04.2008.

Some stuff
- Malossi E13
- Motul 710
- Stage6 adaptor
1216064452.JPG


21.04.2008.

- Keihin PWK 24mm carb

1216064497.JPG


1216064517.JPG


24.04.2008.
1216064571.JPG


1216064596.JPG


C21

1216064617.JPG


1216064633.JPG


1216064655.JPG


1216064673.JPG


1216064700.JPG


Using RedBull can i made my handmade passageway collecter. So some gasoline from carb can flow into a can.

1216064729.JPG


29.04.2008.

Mini update

-3,5gr rollers
- Tomaselli twist grip.
- Motul additive for cooling liquid . Reduces temp. for 15*C.

1216064812.JPG


06.06.2008.

1216064852.JPG


So for my high end engine need better cooling system, so i get on of the both F12 radiator.

07.06.2008.

-Stage6 bearings;
-Hebo small end bearing;

So i ride some test ride with my 2008. summer setup.

1216064883.JPG


Some pics

1216064907.JPG


1216064927.JPG
:great:

So one stupi video from us :D
[ame="http://www.youtube.com/watch?v=lJgkhT0HDhM"]YouTube - Stage6Sport Pro C21[/ame]

16.06.2008.

Area51 mudguard

1216065054.JPG


1216065071.JPG


1216065084.JPG


12.07.2008.

-MHR Wingbell;
-MHR Delta Clutch;
-Stage6 Vforce3;
-Italkit Selettra Curva 2

-MHR Wingbell
1216065233.JPG



-MHR Delta Clutch

1216065247.JPG


-Stage6 Vforce3

1216042043.JPG


-Italkit Selettra Curva 2

1216042063.JPG


Sorry for pics quality. Photo shot by Vforce3 :D

15.07.2008.
So i get this legshield from my friend, and tunet it a little bit.

1216128217.JPG


1216128230.JPG



16.07.2008.

Tunet ignition cover;

1216239718.JPG


1216239737.JPG


20.07.2008.

So from another friend i get this plastic, so i tuned it too.

1216553966.JPG


After that opening will be my F12 radiator.

1216553948.JPG

I tuned other side of plastic too. Plastic has been painted by Craft spray color. 8) :D

29.07.2008.

Мясо
s387.gif


-Metrakit Pro Race 2

1217336886.JPG


1217336902.JPG


1217336919.JPG


So here is all of my high end parts, except Overrange set.

10.08.2008.

Polished igniton cover.

1218638365.JPG


22.08.2008.
-SSP water pump

1219475614.JPG


1219503971.JPG


05.09.2008.

-MHR Overrange 2005 set

1220641030.jpg


19.09.2008.

Season 2008 closed. Scooter under construction.


1221846936.JPG


1221846950.JPG


1221846965.JPG


05.10.2008.
- Koso Mini GP tacho.

1223292492.JPG


Place for it will be here.

1223292583.JPG


25.10.2008.

Polished carb
1224943650.JPG


1224943665.JPG


Mounting crankshaft

Warming...
1224943702.JPG


1224943680.JPG


1/2 in

1224943771.JPG

Done

1224943755.JPG


Tuned carters.

1224943731.JPG


26.10.2008.

Engine is ready. I made my handmade manifold too. Here it is a little bit too long, so i`am going to cut it a little.

1225023792.JPG


1225023816.JPG


1225023839.JPG


1225023858.JPG


1225023875.JPG


[STC]

1225023893.JPG


My name- R. Eisans
1225023914.JPG


1225023945.JPG


20.11.2008.

-Stage6 subframe
I am goint to tune it, because this part from stage6 is not very strong, some guys in latvia, and in SA these subframes was crashed.
1227205207.JPG


18.01.2009.
[ame="http://www.youtube.com/watch?v=XQs9bD8dDQc"]YouTube - Yamaha Aerox Mk PR2 first start[/ame]

Vario removed
 
Advertisement - register to remove this

I already saw it on Estonian Scooterclubs site and I love it. In case, that you are building it for speed then the looks aren't so important.
 
Nice work, maybe you know how many hp you have at yours rox?
hei, my topic on top again :D. actually I didn`t checked it on dyno stand. Season was ended, but MKPR2 tricked me, so the squish was too big, and ya, exhaust port was triple not double, so there wasnt very big tuning opportunities for this cilynder, so i decided to sell MKPR and buy Hebo red revolution for very low price- 65 lats= 90 euros, used about 100km. :D so, cartes now is tuned for Red revo., i must install my ignition and cylinder, and i can do some engine response test, so see ya later, there will be some news again soon :)
 
aii ruu...nice modification...i haffis from malaysia just like ask you how much that you buy the selettra?because in malaysia is hard to find that thing..
 
greetz from estonia!

nice aerox you have, but i have some questions, how did sport pro run with c21?

But Latvians are making name for themselves in estonian scooter races with their speed and reliable scoots!


Ps: haven`t you thought about raceing ?

waiting for more up!
 
Back
Top