Puch Maxi Custom 2010 7*' (Denmark DK)

[Dz2807]

Hello Scooterforum.net ,
I started with a Puch Maxi project as I would love to show up.

We start from scratch when I buy a 'ripped' Puch Maxi which is not even the engine .

Then I started to pimp it, I started to buy some rims (Standard Star Puch Maxi rims), but the one wheel missing a hub!

Then I finally bought a Puch Maxi Standard Engine (E50 Kickstart).

Now I had also purchased a new rear wheel where the hub was with.

Cylinder, Cylinder head and Carburetor (Standard).

TNT Grid and BCD Orange Handles.

Then my dad and I made a Puch Maxi chassis-amplifier* out of iron

We had also made a custom Puch Maxi seat out of iron.

Test fitting, since it would look like.

New headlamp (Chrome / Black).

Then we bought a Tomo Quadro (Sale without rims).

Test fitting with Tomo Quadro rims + fork - The idea was scrapped!!

Then came MiniBike Superbike (R1) into the picture.

Removed the frame-amplifier again.

Then came something of Minibike onto the Maxi, equal noticed that things are screwed together, not welded (ie that it is not constructive change, but pimp!).

Then came the Fuel-Tank on.

And the motorcycle (R1) parts.

The Mudguard and rear wing (Aero).

Was just trying to sit on it :winner:.

The things have come back from sandblasting, and is on track to be run out to the Powder Coating (Black).

Come back from powder coating.

The motorcycle-parts are abrasive and primed (With spray gun!).

Test fitting again after motorcycle-parts returned from the auto paint.

The exhaust to sit chewing - Test exhaust.

Proof that it is a 'real' Maxi Puch.

New tankpad in Carbon / Black - Lie noticed Puch labeled by the regime.

The right exhaust, which will sit on Lattice heat shields and chrome end.

Carbon vinyl before and after.

Custom thingys soon done

More carbon vinyl.
The Project now, but there are a lot more!
Remember that Maxi has been focused on that it must be really delicious and at the same time be lawful (At any rate, on Danish roads)

-Translated with Google translate :#
Sorry that I have not had time to correct the small mistakes (Spelles)

 

[SF2B]

Looks cool

 

[Julez]

omg hahahaha that is AWESOME!

It's weird to see such small R1 bodyparts with such big wheels!

Looks great man, very cool idea!

 

[henk]

It`s really awesome!
But you can the front fork do any lower.. is much better.

 

[RIep11]

its Realy nice!

 

[melf #50]

better call it "big wheels" project

in comparence with the rest these wheels are really HUGE

maybe use a pair of Tomos Youngster wheels?

 

[Tomdb]

Nice project. you got any working front brakes on that thing?

 

[Dz2807]

The Tomos Wheels is 16" and the 17", so wont change the look very much, and yes, i am going to buy a 330mm front brake and a smaller to the back*D.

 

[InIMoeK]

Get some Puch maxi Z-one rims... 3 spoke 16 inch

 

[VaugHan]

haha verry verry nice

 

[melf #50]

The Tomos Wheels is 16" and the 17", so wont change the look very much, and yes, i am going to buy a 330mm front brake and a smaller to the back*D.

they are 12 inch , Youngster

then you can also use the Youngster front fork , wich is a lot better and it has brake disks instead of drums..

 

[Dz2807]

they are 12 inch , Youngster

then you can also use the Youngster front fork , wich is a lot better and it has brake disks instead of drums..

No the Tomos Wheels is 16" and my Maxi Wheels is 17" .

and i am going to buy a 330mm brake disc, is going to look like this.

Just larger and another brake disc design (model)

 

[ri4ikmens]

looks agressive

 

[melf #50]

No the Tomos Wheels is 16" and my Maxi Wheels is 17" .

and i am going to buy a 330mm brake disc, is going to look like this.

Just larger and another brake disc design (model)

use Google and type TOMOS YOUNGSTER

Tomos wheels are also in 17 inch , from a At50 or BT50 , with original brake disk and Marzocci hydraulic front fork , cant go much better then that on a Puch..

the original puch forks are very dangerous!! , very very very dangerous if you are going to use a huge brake disc like that!! I hope you have a good insurance :X

I used to have al lot of these Tomos front wheels but threw them away :X

 

[Dz2807]

use Google and type TOMOS YOUNGSTER

Tomos wheels are also in 17 inch , from a At50 or BT50 , with original brake disk and Marzocci hydraulic front fork , cant go much better then that on a Puch..

the original puch forks are very dangerous!! , very very very dangerous if you are going to use a huge brake disc like that!! I hope you have a good insurance :X

I used to have al lot of these Tomos front wheels but threw them away :X

Aha, but it would be a 'constructive change', also I not allowed to drive on Danish roads!

But it will only be look like with the brake discs, i wont get them to work:X

 

[bwstattoo]

VERY NICE AND LOOK GREAT

 

[trueOverrev]

great project. Congratulations. Looks very nice

 

[Italjohn]

Special "scooter"...... I have never seen any one like this in Norway.
You have done a great job with it.

 

[ipodtouchtony]

nice project...:love::winner:

 

[Dz2807]

TRIPLE DISC (TD)

New UPDATE##
Excuse the long period where there has been a 'bastard', but has started to move and therefore I have not had a chance to make something of it or take pictures
Got caught just 2 shots of Triple disc'ne (3 x 310mm brake discs) and the red reflex flaps.

images.scootergalleri.dk/uploads_alb_large_wm/901029_l.jpg

310mm rear brake disc and a rear sprocket and reflective red rim tape.

images.scootergalleri.dk/uploads_alb_large_wm/901030_l.jpg

(DD) Double disc front with 310 mm brake discs and reflective red rim tape.