MHR Minarelli Ciao

Status
Not open for further replies.
N

NordicPride

Guest
[size=+2]Minarelli[/size] TeamSpeed II [size=+2]Ciao[/size]​




Cil: MHR Replica
Me vs. KTM125 & CBR 600:
[ame="http://www.youtube.com/watch?v=drVj89qnakI"]YouTube - Minarelli Converted Ciao[/ame]

Cil: MHR Team Speed2
New setup, first start:
[ame="http://youtube.com/watch?v=yFvy9kzTwE4"]YouTube - CiaRelli upstart[/ame]

Cil: MHR Team Speed2
Some testruns:
[ame="http://youtube.com/watch?v=PJut3opESk8"]YouTube - Rastar "Ciaoen"[/ame]
[ame="http://youtube.com/watch?v=cO4s1cHlc8c"]YouTube - CiaRellin varvar till lite[/ame]

Info.
Frame: 20 Kg
Totalweight: ~45 Kg

Old setup:
Dynojet - AVA Mc, Stockholm
10.25 BHP SAE
6.75 Torque

Nya Setupen:
Dynojet - VRT, Västerås
--.-- BHP
--.-- Torque

Historia
The idea of this bike got me when i realized how tiny and light a Ciaoframe really is. Quickly i started to look for a trashed but cheap Ciao in the area of Stockholm, later i bought my friends for 25€. We attached transportcables from it to my SR70 and drove it to my house. During the winter of 2006 I didnt buy moore things than the aircooler and frontsuspensioner, because the carter and my rims are barrowed from my SR70. The material for the reinforcements, the wellding and all the steel is from my job, where i work on it. Don't tell me that i trashed my SR70 for this thing.. ofcourse I can take the carter off.​



-THE AMPHETAMINE-
Minarelli LC Disc Block ( VRT Tuned )
Malossi MHR Team SPEED II
Malossi MHR Eprome
Malossi MHR Vario
Malossi MHR Rear-pulley (Over-Range)
Malossi MHR Head-pulley
Malossi MHR X Kevlarbelt (Over-Range)
Malossi MHR Delta Clutch 107mm
Malossi MHR Black clutchsprings
Malossi MHR Torque Controll
Malossi MHR VL14 Reedhouse
Malossi MHR Shortneck
Malossi MHR Carbone reeds
Malossi MHR 13/44 H.T.Q. Primary
Stage6 Racing R/T 85mm stake @ 12mm
Stage6 Spacerdistance - 5mm
Stage6 Vario weight set X2
-2.5Gr, 3.0Gr, 3.5Gr, 4.0Gr
-4.0Gr, 4.5Gr, 5.0Gr, 5.5Gr
Stage6 C4 Metal
Stage6 Racingbell 107mm
Stage6 Double-layer (Black)
Stage6 TM Jetsize set S100 - S148
Polini 15/42 Secondary
Top Performence Nardo gearcap
Yasuni Carrera 21 Racing Kevlar
Mikuni TM28ss
Kiesler membrandistans 4mm
NGK Sparkplug Hat
NGK Iridium - BR10EIX

(Gearing factor: 9.47)


Where it all began.
1174242278_914393294.jpg

Orginal.jpg


Cooler from an Aerox.
PICT0106.jpg


Sandblasted.
PICT0147.jpg

PICT0154.jpg

PICT0145.jpg


Testmounted the rims from my SR.
PICT0024.jpg

PICT0022.jpg

PICT0025.jpg


One day at the office.
Enjoy!
DSC00087.jpg

DSC0062183.jpg

DSC0062184.jpg

DSCgg00621.jpg

DSC0062182.jpg

DSC006238.jpg


Some accesoaries :)
PICT0084.jpg

PICT0081.jpg


[Reinforcements.
PICT0034.jpg

PICT0035.jpg

PICT0039.jpg

PICT0057.jpg


The manifold
*p0rn*
DSC00085.jpg

DSC00089.jpg

DSC00081.jpg


The cooler is on.
DSC00090.jpg

DSC00097.jpg

DSC00094.jpg


Sexiga legs.
Nu har jag en komplett framdel för projektet! Kalasfina gaffelben från en SR50, glänser tillsammans med min fälg
PICT0099.jpg

PICT0102.jpg



PICT0121.jpg

PICT0118.jpg

PICT0125.jpg

PICT0120.jpg


Hot hot hot welldings <<33
PICT0188.jpg

PICT0200.jpg

PICT0205.jpg

PICT0207.jpg

PICT0208.jpg

PICT0209.jpg


Nightwork, 16:00 - 23:45
DSC00116.jpg

DSC00117.jpg

Remember I'm 165. :D
DSC00118.jpg

Sprint-ZtajL - HAHA!
DSC00122.jpg


Laagerhouses
PICT0018.jpg

PICT00223.jpg

PICT0029.jpg

PICT0030.jpg

PICT0031.jpg


Fuelpump
1176136056_90035288.jpg

1176136098_1627662901.jpg

poomp.jpg


Frihamnen Meet
SP_A0750.jpg

DSC_7063.jpg

DSC_7065.jpg


Preperation for the paintjob
PICT0061.jpg

PICT0059.jpg


Blackpainted
I choosed to go black since i have so much black stuff on it allready, The airfilter, cooler, the steeringbar, the sadle, the tires etc.
DSCN0940.jpg

DSCN0944.jpg

DSCN0939.jpg


Modifications of the plastic parts
The bike will get some moore "ciao-style" with the plastic. Alot of the reinforcements will dissapear, Looks alot better allready.
aa.jpg

front.jpg


Result from summer of 2007
DSCN1692.jpg

DSCN1695.jpg

DSCN1700.jpg

DSCN1693.jpg


Tripple-Up med ramförstärkningar!
The third and last reinforcement is on. And I welled a plate on the backside of the saddle to make it moore stabil. It turned realy steady compared to before!.
img4176pm5.jpg

img4181xx5.jpg

img4187lp4.jpg


Some new eyecatchers .
Bar, fueltankcap and a brand new saddle.
alltiz4.jpg

lockeh1.jpg

dsc02463cr0.jpg


2001593910680391451_rs.jpg

2001501682554702277_rs.jpg


Speedcounter
I've started to create my own speedcounter. The counter will be connected to the original outtake on the front wheel.
dsc02462nx8.jpg

meetau6.jpg

backqq2.jpg

frontas4.jpg


BONUS PIC!! :D
New parts in Tha houseee!
-MHR Eprome
-MHR 13/44
-MHR Torque cont.
-S6 Viktset
altuc5.jpg


package to Pro Tjoeners.. :ninja:
The guys from VRT (Västerås Racing Team) will do a matchporting for my MHR Cilinder.
paketbp1.jpg


The fram will be re-blasted with some sand!
Later i will do play with some plastic padding to make the frame moore even.
bakmi4.jpg

fraamerm6.jpg


Sandblasted
IMG_4218.jpg

IMG_4221.jpg

IMG_4214.jpg

IMG_4219.jpg


Mikuni TM28ss.
TM28 vs. TM24.
bda.jpg

sten.jpg


Now I've got a complett carter! :D
MHR Shortneck
Malossi Delta-clutch
Stage6 Double-layer
med mera..
IMG_4235.jpg


Look at this pretty carburator :)
IMG_4237.jpg

IMG_4236.jpg

IMG_4239.jpg


The frame do now have some padding on it.
spack.jpg

spack2.jpg


This is how it looks for the moment.
I've started to fill out the frame with some parts.
hela.jpg

meet.jpg

DSC02627.jpg


The carter has arrived
The portjob was excellent, I have nothing to complane at. The manifold will be angled straight ahead instead of backward. (as on the picture).
port.jpg

porta.jpg

motor2.jpg

motor.jpg

Tjoened by VRT

The carb. has been mounted
This is tight! I didnt have much room with the TM28. Hahah! Looks pimp though. :)
3-1.jpg

3.jpg

2-1.jpg

wi.jpg

d492f28d.jpg


Me Vs. maxexpanded black springs.
They are hard to wrestle with, but i won. ;)
DSC02910.jpg

DSC02909.jpg


Alot of work has been done now
-New laagers and oil in the frontfork
-Lowerd the frontfork
-Installed the ignition
Plus some other things
DSC02957.jpg

DSC02956.jpg

DSC02959.jpg

DSC02962.jpg


Killcable, not much to tell..
kap.jpg


New cooler.
I had to buy a new cooler since the old one was leaking. This is freeeeesh. :)
DSC03004d.jpg


FILM!
07-05-2008
[ame="http://www.youtube.com/watch?v=yFvy9kzTwE4"]YouTube - CiaRelli upstart[/ame]
wie.jpg


Wheelie/Dragsterbar
DSC03043.jpg

DSC03042.jpg


//Kim
 
Last edited by a moderator:
Advertisement - register to remove this

I'm not sure of the color. Maybe I pick black again, because it matches to every black part on the bike, it would look cool i think. But if someone have any ideas, please tell me. :)

thumbs up for u guys, thanx.
 
You are doing great jobs with metal!!

If this was mine, i'll make it between orange and gold, and the white paint on your rims black


or spray it silver/grey metallic, a metal look (i think your custom work will be seen better with that colour if it looks like metal)
 
This is a very Popular projekt in sweden:)

I like it very much(L)and You are doing a great job...
 
I know this thing for a long time:)

Even had you on MSN, but after somebody kicked all of my contacts out of it, you where gone.

Nice to see your'e still doin a great job on your ciao!;)
Looks cooler with the day!
 
Yoww kim dude :D

still love the ciaow! you are taking it to a next level :D
ill talk to you later! ciaow
 
yeah nice machine.. but it looks like u can cut of a full cm on the manifold.. maybe some extra-preformance
 
Wow really nice setup you have there!!9||6
I Have exactly the same carburator!
Could you please tell me your exact settings cause mine is giving me a very hard time.... |(
 
wow is all i can say this is truely a good custom job, alot of fabrictions, i will i had the resources to fabricate large items, good work !!
 
Status
Not open for further replies.
Back
Top