Alphamaennchen
32hp on 186cc no NX
so guys and girls
Thats my new project
the frame was a Zip (1serie) frame from 94
the engine will be a runner 180 (disk) with big bore cly and longstroke crank (205cc)
setup will be:
gilera runner engine
gilera 180 zyl Big bore *Tommy tuned*
s&s crank or 57mm fht crank
S&s exhaust or pm tuning exhaust
pm tuning super billet head
pm tuning clutchbell
leonelli ignition
malossi multivar 2000 for 4stroke maxis
malossi maxi delta cltuch 2stroke var.
malossi x kevlar belt
malossi rear pully 4stroke var.
malossi sec. gear
MMW intake
vforce3 rd350 reeds
keihin PWM 38 or keihin pwk 41 pro
Nx pir. system
i think the hp it will be over 40hp without nx and i hope 48hp with nx (my old maxi has over 32hp without nx and its only 186cc)
here some scatches from the frame after the modi.
here the engine (its a multi. engine)
l&m design tail
orignal zip front
and the 3spoke rim and 1serie Fork
...day 2
....day 3
trash...
...day 4
with Nx bottle
with taIL
steering
rear rim 8inch x 8inch alu rim (its be lighter than a normale zip rim)
zip braKedisk (it will be fit)
and today was play day
krt alu tank from a good friend (1l )
its a 50cc engine the watch who the engine fit (i said play day ;D)
thats 2 heidenau slicks (2x100mm > 200mm) and my quadtire will be 205/65- 8
the exhaust is a 209cc fht exhaust but its crap....i drive s&s exhaust or pm xtech 59
Thats my new project
the frame was a Zip (1serie) frame from 94
the engine will be a runner 180 (disk) with big bore cly and longstroke crank (205cc)
setup will be:
gilera runner engine
gilera 180 zyl Big bore *Tommy tuned*
s&s crank or 57mm fht crank
S&s exhaust or pm tuning exhaust
pm tuning super billet head
pm tuning clutchbell
leonelli ignition
malossi multivar 2000 for 4stroke maxis
malossi maxi delta cltuch 2stroke var.
malossi x kevlar belt
malossi rear pully 4stroke var.
malossi sec. gear
MMW intake
vforce3 rd350 reeds
keihin PWM 38 or keihin pwk 41 pro
Nx pir. system
i think the hp it will be over 40hp without nx and i hope 48hp with nx (my old maxi has over 32hp without nx and its only 186cc)
here some scatches from the frame after the modi.
here the engine (its a multi. engine)
l&m design tail
orignal zip front
and the 3spoke rim and 1serie Fork
...day 2
....day 3
trash...
...day 4
with Nx bottle
with taIL
steering
rear rim 8inch x 8inch alu rim (its be lighter than a normale zip rim)
zip braKedisk (it will be fit)
and today was play day
krt alu tank from a good friend (1l )
its a 50cc engine the watch who the engine fit (i said play day ;D)
thats 2 heidenau slicks (2x100mm > 200mm) and my quadtire will be 205/65- 8
the exhaust is a 209cc fht exhaust but its crap....i drive s&s exhaust or pm xtech 59
