1) Hebo Performer
2) Doppler S3R
3) Yasuni R or anything better.. I would like to get best exhaust for this money, because i Dont want to have it restricting.
Indeed, you can't go wrong with Yasuni R, Gianelli Shot, Stage6 Pro, Polini 4race, TP Nardo, Bidalot S2... They will all perform in a similar way. But I would go for the stage6 because it looks so damn good
Okay, Ill go for the Stage6, It has nice price and Design, But Ill have some Questions :
What Clutch and Contrast Springs I should use, Lets take company 'Malossi'
Then what Jets I should use in my carburettor ? (19mm D'O black edition).
What would be the best Spark Plug I should use for my cylinder?
What Crank bearings and small end bearings I should use ? (Choose 'Malossi' ones to speak about, because Ill get them easily from local dealer, no ordering for bearings).
well i think you should take the stiffest spring( contra spring)
for minarelli its RED and with the rollers you'll need roughly about 4,5g
with your clutch you ned it to engage at about 7,000 rpm so find the springs for that
for the sparkplug take something like a b9eg that should be fine
with the carb if your using a powerfilter your going to need about a jet about 110-120
any bearing will be fine for the main bearings, but take a Malossi small end bearing
you need to use the stiffest contra spring
i think on the delta clutch you can try black springs at the loosest position
for the rolls with the red spring dont just use whatevere is available its a very precise setting, use 4,5 like i said, that will be a nice starting point
oh so you have the std airbox i think you should try about size 90-100 main jet
The diffest Contrast spring is RED, like you said.. Black Springs are only for clutch.. Dont you think I should put a little weaker, maby yellow ones for Clutch ?