bad fitment??

[ma11b]

i have a metrakit pro race pipe on a pro race cylinder
what i thought was gunna be a perfect fitment turned out, well poo

both for piaggio as i have a piaggio block
fitted it into the frame today and tryed the exhaust

first of all the subframe was in the way
maniged to get it on after abit of stressfull wiggling

but
its on a angle (got pics)

there is a huge gap between the bracket and case
and a small gap between the tyre and pipe :S

somone help

 

[craftydg]

for one is the exhaust for this bike and if so have you fitted it correct? does the sleve fit all the way up the exhaust when off the bike? if yes then you need to fit it on straight as if bent will no slide on nicely oh and as for the big gap between the back bracket you need a big spacer.

i have a metrakit pro race pipe on a pro race cylinder
what i thought was gunna be a perfect fitment turned out, well poo

both for piaggio as i have a piaggio block
fitted it into the frame today and tryed the exhaust

first of all the subframe was in the way
maniged to get it on after abit of stressfull wiggling

but
its on a angle (got pics)

there is a huge gap between the bracket and case
and a small gap between the tyre and pipe :S

somone help

 

[ma11b]

the exhast stops half way up the sleave
doesnt go fully in

i think i found a solution, using my leo vinci spacer

 

[SF2B]

A sleave is the thing that you put on the cilinder? A friend of me has an NRG too, and he uses my Pro Race exhaust now. You have to put the sleave in the exhaust and then bolt it to the cilinder.