A&P project ROX (portugal)

aerox white

A&P project rox
Hello users of the community scooterforum.net ;)
I now congratulate the moderators who have the best forum here *D
Now to a brief presentation of my project with great cost that is being made:

setup

-Crankcase: Minarelli horizontal long yamanha aerox "by RV tuned"
-Cylinder: Polini evoII pin 12 "by RV tuned"
-Crank: Polini evo pin 12
-Roller-Crank: SKF C4 in Polymer
-Escape: Malossi MHR team I 2004
-Carburettor: Keihin PWK 28mm original "by RV tuned"
-Cape-Air: Stage6 150cm
-Kit for admission: Stage6 R / T
-Box-thin: Stage6 Vforce3 by TASSINARI
-Lamelas: Stage6 on carbon cut to 45 for Vforce3
-Air-Filter: Dual Layer Stage6 black racing
-Circuit Court of gasoline: Koso
-Cinobloco "by RV"
-Ignition: PVL Rotor Fire 650 with lighting and programmable
-Sail: w34 of Denso
-Pump water: Bmw 12v
-Second Radiator: 50cc Gilera Runner "by RV"
-Cooling tubes: transparent motorforce


Transmission

-Variable: Malossi MHR overrange 2005
-Clutch: Polina Speed 2G Evo II 107mm
-Campanula: Polina evo II 107mm
-Ring anti-twist: Malossi
-Poli-back: Malossi MHR Overrange
-Web: Malossi X-Kevlar Overrange
-Transmission-primary: Polini 13/44 evo
-Transmission-secondary: Polini 15/42 evo
-cover transmissions: Top performance

The scooter that will be subject of this preparation is a aerox 2003
ddzwno676045021sa2.jpg





Throughout my preparation if you come to any changes in my setup put here ;)
All comments related to my setup will be welcome*D

-Cylinder: Polini evoII pin 12 "by RV tuned"
-Crank: Polini evo pin 12
-Roller-Crank: SKF C4 in Polymer
-Exauhst: Malossi MHR team I 2004
-Pump water: Bmw 12v
-Variable: Malossi MHR overrange 2005
-Clutch: Polina Speed 2G Evo II 107mm
-Poli-back: Malossi MHR Overrange
-Web: Malossi X-Kevlar Overrange




-Kit-admission Stage6 R / T d = 26/28mm orange
-Cable-air Stage6 150cm
-Dual-Layer Air Filter Stage6 Racing Black
-Cut petrol-Koso
-Lamelas-carbon Vforce3
-Downhill STR8-handlebars black spleen
-Mini-LCD temperature Stage6
-Fist-fast switches and Stage6 Gray
-Lamelas: Stage6 on carbon cut to 45 for Vforce3

dscf0017km8.jpg

dscf0026ku6.jpg

dscf0020jy5.jpg

dscf0024ye6.jpg

dscf0022cm3.jpg

dscf0030ql7.jpg


An idea of how to get the bike (color) ;)

dscf0044tm4.jpg
 
Last edited:
Advertisement - register to remove this

I am trying to set up the pvl 650 fire on my dragster with polini evo. Problem I'm having is with the lighting coils. I am pretty sure I have it wired up right but I'm not getting voltage from the red lead that connects directly to the battery. Do you have access to a better wiring diagram than the o e it came with?
 
you have a very nice project going on, how much did everything cost you??


Continua com o bom gosto, eu pintava a scooter preto e branco ;)
 
Back
Top