180cc 2t gilera runner wich CDI?

[crlracing]

Ik heb een 180cc gileramotor gekocht maar het camed met uit cdi en ik weet niet het heksenmodel correcte aangezien ik reeds 2 versies zag, één met 2 schakelaars en andere met 3 schakelaars is. Wat is ik zou moeten gebruiken?

http://i.ebayimg.com/03/!BVDezcQ!2k~$(KGrHgoH-CIEjlLl26,yBKQlwoQeW!~~_1.JPG

http://i.ebayimg.com/20/!BVCDWIwBmk~$(KGrHgoH-CIEjlLl26,yBKQeP2kwGQ~~_1.JPG

Dit is de schakelaars op mijn motor

http://img200.imageshack.us/i/kgilerarunner1252006200.jpg/

Dank u voor uw hulp en droevig voor mijn het slechte kronkelen


Original in english

I have bought an 180cc gilera engine but it camed with out cdi and i dont know witch model is the correct one since i already saw 2 versions, one with 2 connectors and other with 3 connectors. What is the one i should use?


http://i.ebayimg.com/03/!BVDezcQ!2k~$(KGrHgoH-CIEjlLl26,yBKQlwoQeW!~~_1.JPG

http://i.ebayimg.com/20/!BVCDWIwBmk~$(KGrHgoH-CIEjlLl26,yBKQeP2kwGQ~~_1.JPG


This are the connectors on my engine
http://img200.imageshack.us/i/kgilerarunner1252006200.jpg/

Thank you for your help and sorry for my bad writhing

 

[Vinnie]

wat is dit voor toekie toekie taal?

kom op man.. dit is toch niet te lezen

 

[crlracing]

wat is dit voor toekie toekie taal?

kom op man.. dit is toch niet te lezen

Sorry! It looks like the translator sucks!

 

[Bas]

We have an english section at our forums:

http://forum.scooterforum.net/forum/f95/

You can post your issue there in english, and then we will try to resolve it.

 

[Bas]

Reopened.

Can you tell me wich year your scooter is?

Also i would think of the CDI unit with the 3 connectors, but it seems your second connector shoudl have a splitter to go into the 2 other connectors?

 

[Bas]

And are you sure it's a 2-stroke? Your picture of the connectors seem to fit on the 4-stroke CDI?

 

[crlracing]

Yes it is a two stroke for sure. From the two connectors that came out of the generator the 3 hole one is for lights and the other one is for CDI unit but question is realy because the CDI unit has 3 conectors, the first one is to connet to the HT coil and the last one will connect to the plug of the generator but with it work with out nathing connect to the midle connection? What about the CDI with 2 connectors only? It that one the way to go?