I readjusted the carb air/fuel mix and the scooter performance got a lot better.
Gonna have a look at the rollers and belt as they have about 15k on them and could be impacting performance also.
but overall, performance still not as good as before I'd say but I can live with it.
On my Peugeot Tweet RS I just had the Exhaust replaced (due to leak), after getting the Scooter back from the Garage i notice the scooter bogging down during acceleration and struggling to reach top speed, also a bit difficult to start in the morning.
basically the scooter is now pulling...
Sorry maybe I was not clear,
There is no continuity between white and grey with alarm armed or disarmed.
And there is continuity between white and white/grey with alarm armed and also disarmed.
I assume the alarm is defect and plan to return to the shop or is there other options...
I tried inserting the grey and white wires from the alarm between the CDI connection and yellow/blue wire as in post 6, but that made no difference same problem as before
So i checked the continuity as suggested and with the alarm connected to the battery and disarmed there is no...
I had a look at the connector and there is 1x red and 1x black coming from battery side and 5x wires coming from the ignition switch only the red and black wires are connected and I'm not sure what other wires(2x green, 1x black-white) are for but on this scooter type I think they are not...
Hi thanks for the advice,
indeed there are black and red wires coming from the switch (photo attached) thanks for clarifying .
I attached the manual I am using so there is better understanding, I guess I need to on P21 do some of step 20 only connecting the red and brown to the battery and the...
Yeah I had a look through it, it helped but as I never built a alarm in before I'm still not sure what cables I need to disconnect, etc.
My understanding of the diagram attached,
I add the brown and red cables to the battery connections
I add the two orange cables to the indicators connection...
I am planning to install a Gemini 953 alarm with a universal cabletree kitca417 on my Tweet RS. I hoped the alarm would come with clear instructions but no, I did find basic instructions online but this still leaves gaps I want to have a clear idea what needs to be done before I start...