1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HONDA SCOOPY SH50R

Discussion in 'General Scooters, all about Scooters.' started by marcus2798, 27 December 2014.

  1. marcus2798

    marcus2798 New Member

    Joined:
    25 August 2014
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    This is my HONDA SCOOPY SH50R. I live in Bermuda so it is hard to acquire high end Dio parts from Asia.
    Also this is not a Dio motor, it is similar. The bolt holes are different spacing. I spent just under $4,000 including the price of 2 bikes. Also, parts are more expensive in Bermuda.

    SETUP:
    POLINI SPORT 47MM 70CC (PORTED)
    POLINI HI-COMP HEAD
    MALOSSI RHQ 12 PIN CRANKSHAFT
    POLINI BIG VALVE 21MM INTAKE MANIFOLD+REED VALVE
    POLINI PWK 24MM CARB
    POLINI AIRSPEEED HALF PULLEY
    POLINI HISPEED VARIATOR
    POLINI SPEEDDRIVE TORQUE DRIVE
    POLINI KEVLAR BELT
    POLINI 107MM 3G FORRACE CLUTCH
    POLINI EVOLUTION 107MM CLUTCH BELL
    HONDA OEM PRIMARY GEARWHEELS
    POLINI SECONDARY GEARWHEELS (Z=15/49)
    POLINI UNIVERSAL CDI (MODIFIED FOR LIGHT COIL)


    SO FAR I HAVE GOT THE BIKE UP TO 135 KMH. I AM STILL DIALING IN THE CARB AND TUNING THE GEARING.
    IMG_20140910_183515.jpg
    POLINI 70CC SPORT (PORTED)
    KGrHqJHJBgE8e6BkfHBPSY7reog601.jpg
    POLINI BIG VALVE 21MM INTAKE WITH POLINI 17.5MM CP CARB
    INSTAKE'.jpeg
    POLINI FOR RACE "SUPERRACE" EXHAUST TO COME SOON:grinning:
    SUPER RACE.jpg
    POLINI PWK 24MM CARB:smilingimp:
    polini-PWK-201.0166-2T.jpg
    POLINI SECONDARY GEARWHEELS
    [​IMG]

    STAY TUNED FOR MORE UPDATES!!!!!
     
    #1
    Last edited by a moderator: 1 January 2015
  2. Advertenties - Gesponsorde links (Only for visitors)

  3. TuningMatters

    TuningMatters Moderator Staff Member

    Joined:
    2 March 2012
    Messages:
    51
    Likes Received:
    11
    Trophy Points:
    8
    Nice! Keep us updated!
     
    #2
  4. Advertenties - Gesponsorde links (Sign-up to remove)

  5. marcus2798

    marcus2798 New Member

    Joined:
    25 August 2014
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    So Heres an update:

    1) 4/03/15 seized crank bearings
    2) found out crank was twisted due to variator half spinning faster than ignition side
    3) decided to upgrade the stock crank to a malossi rhq full circle
    4) going to change transmission for race set up with long gears

    picture of piston
    [​IMG]

    I started to port up my new polini and shes lookin good
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    more pics of the crank and cases to come soon
     
    #3
  6. marcus2798

    marcus2798 New Member

    Joined:
    25 August 2014
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Hey guys
    I know its been a while but finally got some stuff sorted out:

    1) Got new polini reed valve
    2) Finally got the polini super race pipe
    3) Put the crank and new block in
    4) Polini Secondary Gears installed (15/49)
    5) got my stage6 R/T clutch

    heres some pics:

    POLINI SUPER RACE EXHAUST:fearscream:
    [​IMG]
    [​IMG]



    POLINI BigBore REED CAGE AND MANIFOLD:wink:

    [​IMG]

    POLINI SECONDARY GEARING:smirk:
    [​IMG]

    MALOSSI MHR CRANKSHAFT:hushed:
    crank in box.jpeg

    STAGE 6 R/T CLUTCH:screamcat:
    [​IMG]

    CRANKSHAFT INSTALLED:smiley:
    crank installed.jpeg

    CYLINDER KIT POLINI 70cc PORTED INSTALLED:relieved:
    kit.jpeg


    ENGINE COMPLETE WITH FAN SHROUD

    [​IMG] [​IMG]

    HERE IS A PICTURE OF THE BIKE NOW :hearteyecat:
    [​IMG]

    BIKE PULLS UP FROM ACCELERATION AND PULLS WHEELIES NO PROBLEM!:sunglasses:
    heres a video:

    https://www.facebook.com/marcus.amaralpimentel/videos/1182022758489802/?l=2371955501243329747
    https://www.facebook.com/marcus.amaralpimentel/videos/1182023588489719/?l=1561386449550750512


    current vario set up:

    polini 5.5g rollers
    polini white spring
    parmakit torque drive
    s6 R/T clutch with red springs
    2/3 brass weights


    mvt ignition soon to come

    STAY TUNED!
     

    Attached Files:

    #4
    Last edited: 8 April 2016
  7. marcus2798

    marcus2798 New Member

    Joined:
    25 August 2014
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    another update:

    got a RARE ITALTIAN MOTORS cylinder.
    ring gap too close caused a ring to break.
    getting my cylinder replated by Millennium technologies.

    Scooter Swap Shop made a custom pipe with polini, pics soon to come!
     
    #5
Advertenties - Gesponsorde links (Only for visitors)

Share This Page